Instructions / Assembly

Block
11. Secure Frame in Rough Opening
• Fasten frame in rough opening through holes in Head
and Side Jambs using #10 x 2-1/2" Color-Matched
Screws. Tighten until snug.
DO NOT nail into Head Installation Flange or Side
Installation Flanges to secure frame. Frame must
be secured through predrilled holes in head and
side jambs.
Temporary
Shims
#10 x 2-1/2"
Color-Matched
Screw
Remove temporary shims from Head Jamb after
unit is secured. Failure to remove shims may affect
product performance and/or unit operation.
Exterior View
• Remove temporary shims from Head Jamb.
PLUM - LEVEL - SHIM
PLUM - LEVEL - SH
Shim
• Insert shims between Side Jambs and framing at
each fastener location. Shims will be held in place by
fastener screws.
• Shims at Head Jamb are temporary. DO NOT place
shims on top of predrilled holes at Head Jamb.
• Check Head and Side Jambs for level making
adjustments using shims if necessary. Jambs must be
plumb, level, and square.
Allow 1/4" space around perimeter of unit between
exterior finish and door frame for Sealant. Failure
to do so may result in product and/or property
damage.
Clamp
Side Jamb
Level
Head Jamb
10. Shim and Plumb Jambs
Side Jamb
Interior View
Exterior View
Screwdriver
Clamp
BAG
A
Hardware
Needed
#10 x 2-1/2" Color-Matched Screw
Frame Assembly and Installation Guide
13