Instructions / Assembly

• Frames are manufactured for left or right hand operation (L or R) or stationary sidelights. Door operation is as
viewed from the outside.
• Provide a large work area when assembling patio door frame. Cover work area with cardboard to protect
frame parts.
• If frame is assembled away from the job site, attach screw pack envelopes, with remaining screws, to frame for
use when installing unit frame and door panels on the job site.
Stationary Panel
Installation Pack:
(two packs included for
4-panel patio doors)
Operating Panel
Installation Pack:
(two packs included for
4-panel patio doors)
BAG
B
BAG
C
(4 or 6) #8 x 1" Gray Screw
(quantity dependent on patio door size)
(5,7,or 10) #8 x 1-1/2" Color-Matched Screw
(quantity dependent on patio door size)
(5) #8 x 1" Color-Matched Screw
(9 or 11) #7 x 5/8" Color-Matched Screw
(quantity dependent on patio door size)
(9 or 11) #7 x 5/8" Color-Matched Screw
(quantity dependent on patio door size)
(1) Stationary
Panel Bracket
(color-matched)
(1) Dust Plug
Weatherstrip
PG/IR Pack:
(included for Performance Grade (PG) upgrade or
Impact-Resistant patio doors only)
(1) Parting Stop Bracket
(3) #10 x 2-1/2" Gray Screw
(5) #8 x 1" Color-Matched Screw
(2) Panel Hole Plug
(not provided with
Perma-Shield Patio Doors)
Frame Assembly and Installation Guide
7
Frame Assembly and
Installation Pack:
BAG
A
(9,13,17,or 19) #10 x 2-1/2" Color-Matched Screw (quantity dependent on patio door size)
(1) #7 x 5/8" Stainless Steel Screw (only included in BAG A for 4-panel patio doors, 16' width & 8' height)
(14) #10 x 2-1/2" Stainless Steel Screw
Screw Pack Contents:
Remaining screw/part packs below are identied and used in panel assembly guide.
(1) #8 x 1" Stainless
Steel Screw
(1) Insect Screen Latch
(color-matched)
(1) #7 x 5/8" Stainless Steel Screw (only included in Screw Pack
for 4-panel patio doors, less than 16' width & 8' height)