Instructions / Assembly

12
1. Open the door and then let it close.
Note the speed at which the door closes.
2. Use a at blade screwdriver to adjust
the closer to the desired speed:
For a faster closing speed, turn the adjustment
screw to the left (counterclockwise).
For a slower closing speed, turn the adjustment
screw to the right (clockwise).
3. Test the speed at which the door closes after
each adjustment. Adjust the screw more, if
needed, to achieve the desired door closing speed.
a
Storm door will close more quickly when the entry door is open. To achieve the proper closing speed, you will need
to adjust the closer using the built-in adjustment screw. Check for safe closing speed with your entry door in both
the closed and open position. To prevent injury, make sure people and/or pets are completely through the opening
before allowing the storm door to close freely.
WARNING
i
VIEW
ADJUST CLOSING
SPEED OF DOOR
(Right Hand)
13
!
!
1/2”
1/2”
1/2”
1”
1 1/2”
2”
1 1/2”
5/8”
5/8”
1. Open the door.
2. Push and hold the safety release slide up,
then rotate the handle up a 1/4 turn. The
handle should now be in a vertical position.
1. Orient the glass panel (K) so the notches face
the exterior, on the handle side.
2. Slide the glass panel into the door frame on
the hinge side rst. The frame of the glass
panel should be seated into the snugger bar.
3. Then position the handle side of the glass
panel until it is ush with the door frame.
1. While holding the glass panel in place, rotate
the handle down a 1/4 turn to lock the glass
panel in door frame.
TIP: Ensure glass panel is fully seated in door
frame for easy operation.
INSTALL THE GLASS OR
INSECT SCREEN PANEL
(Right Hand)
12
a b c
The glass panel/insect screen is secured in door frame
by door handle locking mechanism. Once door handle
has been rotated up to vertical position, the glass panel
/insect screen are no longer secured in door frame.
Immediately remove glass panel/insect screen from
door frame after releasing locking mechanism. Failure
to do so could result in injury and/or product damage.
The notches located on backside of handle side of glass
panel and insect screen may contain sharp edges. Use
caution when handling glass panel and insect screen.
Failure to do so may result in injury.
WARNING
WARNING
i
VIEW
i
VIEW
i
VIEW
SNUGGER
BAR
Hidden closer is under tension and has several areas
that can pinch as it closes the door. Use caution when
working around the closer components.
CAUTION