User Manual

2
2
000
XXXX
Move selector switch on key pad to “ON” position
.
Move selector switch on key pad to “ON” position.
2
3
4
▶
Repeat steps 3-4 to program up to four windows.
Repeat steps 3-4 to program up to four windows.
S
elector
S
witc
h
Selector Switch
a
Insert paper clip into console’s program button location and hold until key pad LED blinks 3 times slowly and “E” is displayed on the screen
.
Insert paper clip into console’s program button location and hold until key pad LED blinks 3 times slowly and “E” is displayed on the screen.
D
ispla
y
Display
Program Button
Program Button
3X
S
elect console keypad button (1, 2, 3, or 4) and press “Open” on the numbered button for the window you want to operat
e
.
The selected numbered
b
utton will blink
3
times quickly, and the red window operator LED will stop blinkin
g
when the operator is pro
g
ramme
d
.
I
f
red LED on the operato
r
sill cover remains blinkin
g
, repeat steps
2
-5 until operator is pro
g
rammed
.
Select console keypad button (1, 2, 3, or 4) and press “Open” on the numbered button for the window you want to operate. The selected numbered
button will blink 3 times quickly, and the red window operator LED will stop blinking when the operator is programmed. If red LED on the operator
sill cover remains blinking, repeat steps 2-5 until operator is programmed.
▶
P
ower window console programming is complete.
Repeat steps
Power window console programming is complete.