Manualshelf

User Manual

ManualsBrandsAndersen ManualsElectronicsHand-held Remote Control Transmitter for Windows
21222324252627282930
24
000XXXX
After short delay, both remote and console LEDs will blink 3 times quickly, and the remote will be programed to the console. If LEDs do not blink
3 times quickly on both units, wait for console to time out and repeat steps 2-5 until remote is programed.
After short delay, both remote and console LEDs will blink 3 times quickly, and the remote will be programed to the console. If LEDs do not blink
3 times quickly on both units,
wait for console to time out and repeat steps 2-5 until remote is programed.
▶ P
ower window remote control programming is complete.
Power window remote control programming is complete.
▶ Repeat steps 4-6 to program up to four windows.
Repeat steps 4-6 to program up to four windows.
5
Move selector switch on the console to the “ON” position to return to normal operating mode.
Move selector switch on the console to the “ON” position to return to normal operating mode.
6
3X
3X
Move selector switch on remote control to the “ON” position.
Move selector switch on remote control to the “ON” position.
Insert paper clip into enrollment button location and hold until key pad
LEDs blink 3 times slowly.
Insert paper clip into enrollment button location and hold until key pad
LEDs blink 3 times slo
wly.
3 4
3X