User Manual

ManualsBrandsAndersen ManualsElectronicsHand-held Remote Control Transmitter for Windows

000XXXX

Use these codes to help trouble shoot power window problems. Refer to the instruction guide for detailed

installation and operation guidelines. Call Andersen at 1-888-888-7020 for further assistance.

Use these codes to help trouble shoot power window problems. Refer to the instruction guide for detailed

installation and operation guidelines.

Call Andersen at 1-888-888-7020 for further assistance.

LOW BATT lights up to designate

battery may need to be charged or

replaced. Power window is using

AC power source only.

OPEN lights up to designate

window is open or in the operation

of opening. (Units 1-4)

CLOSED lights up to designate

window is closed or in the

operation of closing. (Units 1-4)

NO SCREEN lights up to designate

that no insect screen is present.

Power window will not operate until

screen sensor is fully depressed.

(Units 1-4)

OBSTRUCTION lights up to

designate power window has

detected an obstruction and will

not fully open or close. (Units 1-4)

RAIN lights up to designate

window will close due to rain or

condensation.

RAIN OVERRIDE lights up to

designate override has been

activated. Rain override stays

on and window will remain open

until timer expires. If rain or

condensation is not present after

one hour, the window will remain

open; if moisture is present the

window will close.