User Manual

29
000XXXX
The electric motor will be audible under
normal operation. If the sound from the
driver is excessive and abnormal from
regular operation, check the following:
1) Inspect window and driver for signs of
damage:
- Interference between driver and sill
- interference between driver and cover
- Hinge misalignment
2) Verify all components are secure and in
proper working order
3) Check motor operation:
- Slow opening/closing
- Partial opening/closing
- Above could indicate a failing electric
motor
4) If odor or smoke is present, immediately
stop operation and disconnect battery
and AC power supply
Window Dirver
System Sound
Quality Changes
Excessivly
Window Dirver
System Sound
Quality Chang
es
Excessivly
Wiring schematic for the power operator can
be found on page XX
Where Do I Find The
Wiring Schematic
Diagram?
Where Do I Find The
W
iring Schematic
Diagram?
The electric motor will be audible under
normal operation. If the sound from the
driver is excessive and abnormal from
regular operation, check the following:
1) Inspect window and driver for signs of
damage:
- Interference between driver and sill
- interference between driver and cover
- Hinge misalignment
2) Verify all components are secure and in
proper working order
3) Check motor operation:
- Slow opening/closing
- Partial opening/closing
- Above could indicate a failing electric
motor
4) If odor or smoke is present, immediately
stop operation and disconnect battery
and AC power supply
Wiring schematic for the power operator can
be found on page XX
1) Make sure the control panel, driver and
remote are all adequately powered:
- Correct gage wire is used.
- All are plugged in and turned on.
- Check wiring diagram.
2) Make sure lens cover is free of obstruction.
Issue/ Issue Things To Check / Things To Check
1) Make sure the control panel, driver and
remote are all adequately powered:
- Correct gage wire is used.
- All are plugged in and turned on.
- Check wiring diagram.
2) Make sure lens cover is free of obstruction.
Light on Driver Does Not
Light Up
Light on Driver Does Not
Light Up
1) Make sure the control panel and driver are
all adequately powered:
- Control panel switch is set to on position
- All are plugged in and turned on.
Console Display Does
Not Light Up
Console Display Does
Not Light Up
1) Make sure the control panel and driver are
all adequately powered:
- Control panel switch is set to on position
- All are plugged in and turned on.
Trouble Shooting Continued/