Use and Care Manual

Maintaining Andersen

Hardware

Your Andersen

hardware has been manufactured of high-quality, fine metal. Fine

metal requires periodic attention to maintain its beauty and characteristics.

Climate, location, and exposure to corrosive environments such as industrial areas,

pesticides, herbicides, or salts can affect the hardware’s beauty and characteristics.

• DO NOT use or apply harsh chemicals, abrasives and/or cleaners. Product

damage could occur.

• DO NOT refurbish hardware. Contact a professional hardware restorer for

refurbishing.

Bright Brass, Antique Brass, Satin Nickel, Distressed

Nickel, White or Stone

• Wash hardware using a mild detergent and a soft cloth. Andersen bright brass

and satin nickel hardware finishes are protected with a physical vapor

deposition (PVD) coating process resulting in a beautiful finish that’s resistant

to scratching, corrosion and tarnish. Andersen satin nickel and bright brass

are covered by the same 10-year transferable limited warranty.

Polished Chrome or Brushed Chrome

• Wash hardware using a mild detergent and a soft cloth. Avoid abrasive cleaners,

pads, or brushes.

• Polish chrome finishes using a commercially available chrome polish following

manufacturer’s instructions.

Oil-Rubbed Bronze or Distressed Bronze

• Handling and frequent use create the bronze patina that is the hallmark of

the oil-rubbed bronze and distressed bronze finishes. Oil-rubbed bronze and

distressed bronze are “living finishes” with no protective coating. With use,

your hands will polish away the darker material exposing the bronze beneath.

The appearance of these finishes will vary depending on usage and

environmental conditions.

• Occasionally apply light mechanic oil to deepen the color and sheen of the

product. Cover metal parts with oil entirely, allow the oil to stand for a few

minutes, then gently rub off excess using a clean cloth.

Note: For additional hardware performance and warranty information

visit our website: www.andersenwindows.com

GENERAL FINISHING & CLEANING GUIDELINES

(CONTINUED)