Instructions / Assembly

1. Attach Side Jambs to Sill
#10 x 2-1/2" Stainless Steel Screws and Locations
Interior Edge
of Side Jamb
Exterior Edge of Sill
Sealant
Screw Guide
Sill
Sill Insect Screen Track
200 Series Perma-Shield
®
Gliding Patio Door
and Sidelights
400 Series Frenchwood
®
, 200 Series Narroline
®
,
200 Series Perma-Shield
®
with PG Upgrade, or
8' 200 Series Perma-Shield
®
Gliding Patio Door
and Sidelights
• Apply a 1/8" bead of Sealant (provided in frame
package) to bottom ends of Side Jambs. (Top ends
have a beveled cut.)
• Apply a 1/8" bead of Sealant (provided) to ends of Sill
and position against Side Jambs.
• Fasten Side Jambs to Sill through predrilled holes
using three #10 x 2-1/2" Stainless Steel Flat Head
Screws, making sure insect screen track on Sill is
inserted into slot on bottom of Side Jamb. Screw
fastening sequence must be followed.
Screw 1 : Fasten interior side of Side Jamb to Sill.
Screw 2 : Fasten exterior side of Sill to Side Jamb.
Screw 3 : Fasten center of Sill to Side Jamb.
• Clean up excess squeeze-out of Sealant.
Sealant must be applied to ends of Sill and Side
Jambs to help prevent water infiltration.
• Screw fastening sequence must be followed when
attaching Side Jambs to Sill. Failure to do so may
result in incorrect fit of frame parts.
• Make sure insect screen track on Sill is inserted
into slot on the bottom of Side Jamb. Failure to do
so may result in incorrect fit of frame parts.
• Position Sill and Side Jambs exterior up.
Exterior Side Up
Sill
Sealant
Sill Filler
Side Jamb
Sealant
1
3
2
BAG
A
Hardware
Needed
Frame Assembly and Installation Guide
8
#10 x 2-1/2" Stainless Steel Screw