Datasheet

ManualsBrandsAnderson Power Products ManualsConnectorsHand Tool

www.andersonpower.com

- 30 -

All Data Subject To Change Without Notice

| PP75 ORDERING INFORMATION |

PP75 Standard Housings

The second smallest Powerpole

housing can be used with wire contacts

for up to 6 AWG [10mm²] as well as PCB and busbar contacts.

Description ------- Part Numbers --------

Minimum Quantity ... 1,000 100 ......

Red 5916G7-BK 5916G7

Green 5916G6-BK 5916G6

Black 5916G4-BK 5916G4

White 5916G5-BK 5916G5

Blue 5916-BK 5916

Yellow 5916G15-BK 5916G15

Orange 5916G14-BK 5916G14

Gray 5916G16-BK 5916G16

PP75 Chemical Resistant (CR) Housings

Has the same form and dimensions of the standard

PP75 housing in a chemical resistant PBT/ PC blend

housing. Suitable for use to -40°C.

Description - Part Numbers -

Minimum Quantity ... 1,000 .......

Red P5916G7-BK

Black P5916G4-BK

White P5916G5-BK

Blue P5916-BK

PP75 Locking Dovetail Housings

Offers dovetails for stacking housings that have a locking feature to

prevent housings separating. Can mate to standard and chemical

resistant housings, but cannot be stacked with them.

Description ---------- Part Numbers -----------

Minimum Quantity .... 1,000 100 .....

Red 75LOKRED-BK 75LOKRED

Green 75LOKGRN-BK 75LOKGRN

Black 75LOKBLK-BK 75LOKBLK

White 75LOKWHT-BK 75LOKWHT

Blue 75LOKBLU-BK 75LOKBLU

Gray 75LOKGRA-BK 75LOKGRA

Powerpole

Connectors

- PP75: up to 120 Amps

PP75 series Powerpole

housings can be used for wire-to-wire,

wire-to-board, and wire-to-busbar applications. Wire sizes

from #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power

capabilities up to 120 amps per pole. Locking housings offer

the capability to secure Powerpole

housings to each other

and to mounting pads. Housings made from chemical

resistant (CR) resin withstand industrial solvents better than

standard housings.

• Large Wire Range Accommodates up to #6 (10mm²) Wire

Reducing bushings allow as small as #16 (1.5 mm²) wire to be used

• Wire, PCB, and Busbar Contacts

Allows one connection system to meet multiple needs

• Mini-Powerclaw PCB Contacts Minimize PCB Footprint

Removes the PP75 housing from the board side

[ 47.9 ]

1.88

SECTION 2

Powerpole

PP75

Material ID

Located Here

V0 = Standard

P = Chemical Resistant

[ 47.9 ]

1.88

[ 81.3 ]

3.20

[ 17.0 ]

0.67

[ 15.9 ]

0.62

[ 15.9 ]

0.62

Front View Mated Length

PP75 with

Mounting Wings

Summary of content (7 pages)

PAGE 1
Powerpole® Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole® housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power capabilities up to 120 amps per pole. Locking housings offer the capability to secure Powerpole® housings to each other and to mounting pads. Housings made from chemical resistant (CR) resin withstand industrial solvents better than standard housings.
PAGE 2
NEW PP75 Premate Ground Housings Offers a first-mate, last-break connection when stacked together with PP75 housings. Stacks together with PP75 standard and chemical resistant housings. Housings are mechanically keyed to prevent cross mating with power positions. Description ------- Part Numbers ------- Minimum Quantity.... 1,000 100 ... Green 5927G6-BK 5927G6 Mated Length [ 83.1 ] 3.20 PP75 Silver Plated Wire Contacts NEW [ 11.4 ] 0.
PAGE 3
55A Right Angle Mini Powerclaw PCB Contacts Right angle Mini Powerclaw contacts can be used on the PCB edge without a PP75 housing on the PCB side. A self polarizing design only allow PP75 wire housings to mate to PCB contacts one way. [ 58.4 ] 2.30 Loose Piece Description -------- Part Numbers -------Minimum Quantity ... 1,000 100 ...... Tin Plated PC5934T-BK PC5934T Silver Plated PC5934S-BK PC5934S [ 8.1 ] 0.32 [ 15.6 ] 0.61 [ 12.19 ] 0.480 [ 24.6 ] 0.97 [ 7.6 ] 0.30 [ 2.42 ] 0.095 [ 6.
PAGE 4
| PP75 SPECIFICATIONS | Electrical Current Rating Amperes¹ Wire to Wire (6 AWG) Wire to PCB (6-AWG) Wire to Busbar (6 AWG) UL 1977 CSA 120 70 55 50 75 Mechanical Contact Base Wire Plating PCB Plating Copper Alloy Silver Sn or Ag over Ni Contact Termination Methods Wire Contacts Crimp4 Hand Solder Wire and PCB Contacts Solder Dip* PCB Contacts Wave Solder* PCB Contacts Wrench / Socket Busbar Contacts Mechanical Shock 5 MIL-STD-202 213 Condition A 50g’s Vibration High Frequency 5 MIL-STD-202 2
PAGE 5
| Powerpole® PP75 Accessories | Strain Relief Grommets Use for strain relief in the back side of a PP75 housing. Wire gauge given for reference only, use grommet ID and wire OD to determine suitability in the end application. Dimensions -ADescription - Part Numbers - inches mm Minimum Quantity ... 100 ....................... #6 AWG, Black 114411P2 0.35 8.89 #8 AWG, Black 114411P1 0.25 6.35 #10 - 12 AWG, Black 114411P3 0.17 4.
PAGE 6
Guide Housings for Vertical Mini Powerclaw Contacts Prevents polarity being reversed when a two pole PP75 block is mated to vertical mini Powerclaw contacts. Fastening hardware not included. Description ----------- Part Numbers -----------Minimum Quantity ... 1,000 100 ... Black Guide Housing PC-HSG-PP-BK PC-HSG-PP PP75 Connector Mini Vertical Powerclaw Contact Guide Housing PCB Mounting Clamp SECTION 2 Description -- Part Numbers -Minimum Quantity ... 50 sets of 2 ...
PAGE 7
Powerpole® - Tooling Information W ire Size Reeled Part Numbers Reeled Contact Crimp Tool ATS Applicator Tin Plating Silver Plating #16 / 20 1.3 / 0.52 262G1 262G2 1385519-1 #16 / 20 1.3 / 0.52 269G2 N/A 1385519-1 #12 / 16 3.3 / 1.3 261G1 261G4 #10 / 14 5.3 / 2.1 261G2 261G3 #12 / 16 3.3 / 1.3 269G1 N/A #10 / 14 5.3 / 2.1 269G3 N/A #10 / 14 5.3 / 2.1 200G1L 200G3L #10 / 14 5.3 / 2.1 201G1H 201G3H #10 / 14 5.3 / 2.