Datasheet

ManualsBrandsAnderson Power Products ManualsBattery Connector HousingsHousing, Plug

www.andersonpower.com

- 20 -

All Data Subject To Change Without Notice

| PP15-45 ORDERING INFORMATION |

PP15-45 series are the smallest Powerpole

housings. They can be used for wire-to-wire or wire-

to-board applications. Wire sizes from #20 AWG (0.75 mm²) to #10 (6 mm²) offer power capabilities

up to 55 amps per pole. Finger proof housings and the ability to incorporate rst-mate last-break

ground connectors enhance the capabilities of this Powerpole

series.

High Power Density

• Up to 55 amps in a compact footprint

Wire-to Wire & Wire-to-Board Congurations

• Wire & PCB contacts can be used in the same housings

Finger Proof Housings Available

• Protects against accidental contact with live circuits

Powerpole

Connectors

- PP15 to PP45 :

up to 55 Amps

Finger Proof

Rib Feature

[ 17.27 ]

0.68

[ 3.81 ]

0.15

[ 6.35 ]

0.25

Open Barrel Contact

SECTION 2

Powerpole

PP15 to 45

45A Premate Ground Housings

Green housings are keyed to prevent accidental mating

with standard or nger proof Powerpole

housings.

Description ------- Part Number -------

Minimum Quantity ... 2,500 200 ...

Green 1827G1-BK 1827G1

PP15-45 Finger Proof Housings

Improved on the original APP

design by adding ribs to mating interface to protect against accidental

contact with live circuits. Meets the requirements of UL1977 section 10.2 and is rated IP20. Will not

mate with standard housings.

Description ------------ Part Numbers ------------

Minimum Quantity ... 2,500 200 .....

Red 1327FP-BK 1327FP

Green 1327G5FP-BK 1327G5FP

Black 1327G6FP-BK 1327G6FP

White 1327G7FP-BK 1327G7FP

Blue 1327G8FP-BK 1327G8FP

Yellow 1327G16FP-BK 1327G16FP

PP15-45 Standard Housings

The original housing design has an open interface and is available

in a wide array of colors. Will not mate with nger proof housings.

Description ------- Part Numbers ------

Minimum Quantity ... 2,500 200 ...

Red 1327-BK 1327

Green 1327G5-BK 1327G5

Black 1327G6-BK 1327G6

White 1327G7-BK 1327G7

Blue 1327G8-BK 1327G8

Yellow 1327G16-BK 1327G16

Orange 1327G17-BK 1327G17

Gray 1327G18-BK 1327G18

Brown 1327G21-BK 1327G21

Pink 1327G22-BK 1327G22

Purple 1327G23-BK 1327G23

PP15-45 Tin Plated Power Contacts

Offer cost effective performance up to 1,500 mating cycles. See specications and temperature

charts for amperage ratings by wire size.

Dimensions

Mating Loose Piece Reeled - A -

Barrel AWG mm² Force -------- Part Numbers ------- inches mm

Minimum Quantity ....................................... 200 5,000 .........................

Open 14 to 10 K* 2.1 to 5.3 High 269G3-LPBK 269G3 0.21 5.33

Open 14 to 10 K* 2.1 to 5.3 Low 261G2-LPBK 261G2 0.20 5.08

Open 14 to 10 SF* 2.1 to 6.0 High 201G1H-LPBK 201G1H 0.24 6.10

Open 14 to 10 SF* 2.1 to 6.0 Low 200G1L-LPBK 200G1L 0.24 6.10

Open 16 to 12 1.3 to 3.3 High 269G1-LPBK 269G1 0.18 4.57

Open 16 to 12 1.3 to 3.3 Low 261G1-LPBK 261G1 0.18 4.57

Open 20 to 16 0.52 to 1.3 High 269G2-LPBK 269G2 0.16 4.06

Open 20 to 16 0.52 to 1.3 Low 262G1-LPBK 262G1 0.16 4.06

Open 20 to 16 SF* 0.52 to 1.5 Low 200G2L-LPBK 200G2L 0.20 5.08

K* - For #10 AWG class K stranded wire or smaller. For larger wires use superex contacts.

SF*- Indicates wires with high stranding such as Super Flex.

PP15-45 Finger Proof & Standard & Ground Housing Dimensions

Front View

Mated Length

[ 24.6 ]

0.97

[ 41.2 ]

1.62

[ 8.4 ]

0.33

[ 7.9 ]

0.31

[ 7.9 ]

0.31

Summary of content (11 pages)

PAGE 1
Powerpole® Connectors - PP15 to PP45 : up to 55 Amps PP15-45 series are the smallest Powerpole® housings. They can be used for wire-to-wire or wireto-board applications. Wire sizes from #20 AWG (0.75 mm²) to #10 (6 mm²) offer power capabilities up to 55 amps per pole. Finger proof housings and the ability to incorporate first-mate last-break ground connectors enhance the capabilities of this Powerpole® series.
PAGE 2
PP15-45 Silver Plated Power Contacts Maximize performance by offering up to 10,000 mating cycles and are recommended for circuit interrupt or hot plug applications. See specifications and temperature charts for amperage ratings by wire size. Only closed barrel contacts are suitable for soldering. [ 17.27 ] 0.68 Dimensions Reeled -A- B - Part Number inches mm inches mm 5,000 ................................................. 261G3 0.20 5.08 201G3H 0.24 6.10 200G3L 0.24 6.10 261G4 0.18 4.
PAGE 3
45A Premate Ground PCB Contacts Right angle contacts are suitable for power or ground. Use to mate with 45A ground wire contacts. Tin plated contacts are rated up to 1,500 mating cycles. Can be used with other 45A PCB connectors in the bottom row. Mating Force Minimum Quantity ................... PCB, Bottom Row Low Loose Piece ------- Part Numbers ------1000 100 .... 3-5952P1 1836G1 [ 14.7 ] 0.578 [ 45.3 ] 1.78 [ 41.2 ] 1.62 [ 5.6 ] 0.22 [ 3.6 ] 0.14 [ 28.1 ] 1.11 [ 7.9 ] 0.31 TYP [ 8.
PAGE 4
Powerpole® Pak Connectors - PP15 to PP45 Plug shell with latch Snap-in Powerpole® Pak connector shells enclose stacked groupings of PP15-45 sized housings in a durable black shell for a finished connector appearance and additional features. Inline, panel mount, and blindmate configurations are available. Plug shells offer the option of integral latches and strain relief to help secure your connection.
PAGE 5
NEW Plug Shell with Latch & Non-Conductive Strain Relief [ 21.5 ] 0.85 New 2X3 Powerpole Pak offers an improved ergonomic shell for easier latch operation as well as a plastic, non-conductive strain relief. The new strain relief can accommodate up to a 6 conductor #10 AWG cable. Can mate to a panel mount receptacle. For use with Powerpole® wire connectors only. Cable Clamp and Hardware Pak or Retaining Pins must be ordered separately. To be used with 115G23 cable clamp only. [ 73.5 ] 2.
PAGE 6
Blindmate Pak Connector [ 88.6 ] 3.49 Ideal for panel to panel, bulkhead to bulkhead, or rack mount applications that require the power connector to compensate for up to 0.45 in. [11.43 mm] of misalignment in either axis. Eight positions can be filled with Powerpole® 10-45 connectors. The receptacle side can be used with wire or PCB contacts. Hardware bag includes retaining pins. Description ---------- Part Numbers ---------Minimum Quantity .................................................... 50 25 ......
PAGE 7
SECTION 2 Powerpole® PP15 to 45 | PP15-45 & POWERPOLE® PAK SPECIFICATIONS | Electrical Mechanical UL Ground Short Time Current Test - 45A Premate Ground 750 Amps, #10 AWG Wire 4 Seconds 470 Amps, #12 AWG Wire 4 Seconds Mechanical Shock 4 MIL-STD-202 213 Condition A 50g’s Vibration High Frequency 4 MIL-STD-202 204 Condition A 10g’s AWG mm² Current Rating Amperes¹ UL 1977 CSA/TUV Wire Size Range 20 to 10 0.75 to 6.
PAGE 8
| PP15-45 TEMPERATURE CHARTS | PP15-45 Singlepole Temperature Rise at Constant Current 60 60 30 20 40 30 20 10 10 30 40 Amperes Applied 10 AWG 16 AWG 12 AWG 18 AWG 50 0 60 14 AWG 20 AWG Temperature (°C) 75 50 10 20 30 40 50 60 50 0 10 AWG 16 AWG 12 AWG 18 AWG 14 AWG 20 AWG Temperature (°C) 50 30 20 30 40 50 14 AWG 20 AWG 10 15 20 25 30 35 40 Singlepole 2-Pole Multipole PP25 PCB Derating vs.
PAGE 9
| Powerpole® 15-45 Accessories | Mounting Wing Secure dovetailed Powerpole® 15-45 series housings by passing fasteners through the wings in either a horizontal or vertical orientation. Useful for sheet metal panels, printed circuit boards, and many other mounting surfaces. Fasteners not included. Description ------- Part Numbers ------Minimum Quantity ... 2,500 100 .... Red 1399G9-BK 1399G9 Blue 1399G8-BK 1399G8 Mounting Wings [ 4.6 ] 0.180 [ 7.9 ] 0.
PAGE 10
PCB Mounting Staples PCB staples are soldered into place to secure Powerpole® 15-45 series housings in a horizontal configuration to the board. Reduce strain on soldering joints during mating and unmating. Dimensions Part -A-BNumbers HxW Length inches mm inches mm Minimum Quantity 100 ................................................................................ 114555P1 1x1 Short 0.47 12.0 0.28 7.0 114555P2 1x2 Short 0.47 12.0 0.57 14.5 114555P3 1x3 Short 0.47 12.0 0.89 22.5 114555P7 1x4 Short 0.
PAGE 11
Powerpole® - Tooling Information W ire Size Reeled Part Numbers Reeled Contact Crimp Tool ATS Applicator Tin Plating Silver Plating #16 / 20 1.3 / 0.52 262G1 262G2 1385519-1 #16 / 20 1.3 / 0.52 269G2 N/A 1385519-1 #12 / 16 3.3 / 1.3 261G1 261G4 #10 / 14 5.3 / 2.1 261G2 261G3 #12 / 16 3.3 / 1.3 269G1 N/A #10 / 14 5.3 / 2.1 269G3 N/A #10 / 14 5.3 / 2.1 200G1L 200G3L #10 / 14 5.3 / 2.1 201G1H 201G3H #10 / 14 5.3 / 2.