Datasheet

- 93 -
All Data Subject To Change Without Notice
www.andersonpower.com
SECTION 3 SBE
®
320 / SBX
®
350
| SBE
®
320 / SBX
®
350 CONNECTOR SPECIFICATIONS |
Electrical
Current Rating Amperes ¹ SBX350 SBE320
Primary Power (300 mcm) 350 320
Powerpole
®
Auxiliary (12 AWG) 20 20
1x4 Auxiliary (12 AWG) 20 20
PPMX Auxiliary (20 AWG) 7 UL 5 CSA
Voltage Rating AC/DC UL 1977 EN1175-1
Primary Power 600 150
4
Powerpole
®
Auxiliary 600 150
4
1x4 Auxiliary 200
PPMX Auxiliary 300
Dielectric Withstanding Voltage Primary Power
Volts AC 2,200
Avg. Mated Contact Resistance Milliohms ¹
2 1/2” of 300mcm wire 0.050
Mechanical
Wire Size Range AWG mm²
Power Contacts 1/0 to 300 mcm 53.5 to 152
Auxiliary Contacts 24 to 10 0.25 to 5.3
Max. Wire Insulation Diameter in. mm
Power Contacts 0.440 11.200
Powerpole
®
Auxiliary 0.175 4.450
1x4 Auxiliary 0.140 3.600
Operating Temperature ² °F °C
SBX Housing and SBX With Auxiliary -4° to 221° -20° to 105°
SBE Housing -40° to 221° -40° to 105°
SBE Housing With Powerpole Auxiliary -4° to 221° -20° to 105°
SBE Housing With 1x4 and PPMX Auxiliary -40° to 221° -40° to 105°
Mating Cycles No Load by Plating Silver (Ag) Gold (Au)
Power Contacts 10,000
Powerpole
®
Auxiliary 10,000
1x4 Auxiliary 10,000
PPMX Auxiliary 5,000
Avg. Mating / Unmating Force Lbf. N
Main Connector Housing 45 200
Per Powerpole
®
Connector 5.00 22.00
Per Contact in 1x4 Auxiliary 0.70 3.00
Per PPMX Housing 4.50 20.00
Min. Contact / Spring Retention Force Lbf. N
Power Standard Housing 150 667.2
Powerpole
®
Housing 25 111
1x4 Auxiliary Housing 10 44.5
PPMX Housing 12 53
Materials
Housing
SBX
®
and Powerpole
®
Plastic Resin Polycarbonate
SBE
®
, PPMX Auxiliary and 1x4
Auxiliary Housing Polycarbonate / PBT blend
Contact Retention Spring Stainless Steel
Housing Flammability Rating
UL94 V-0
Glow Wire - SBE320 Only 960°C (GWFI) / 850°C (GWIT)
Power & Powerpole
®
Contact Silver Plated Copper Alloy
1x4 Auxiliary Contacts
Pin Copper alloy, Au over Ni
Socket BeCu, Au over Ni
Socket Body Copper alloy, Sn bright over Ni
Retention Clip Stainless Steel
PPMX Contacts Gold Plated Copper Alloy
Contact Termination Methods
Crimp ³
Hand Solder
[ 20.6 ]
0.81
B
A
D
C
NOTE 1: See IEC 60664-1 for working voltage.
NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded.
¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and a 25°C ambient temperature. UL rating not to exceed
the maximum operating temperature. CSA rating below a 30°C temperature rise.
² Limited by the thermal properties of the connector plastic housing.
³ Use APP recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition.
4
Voltage capability of SBE
®
housings is identical to SBX
®
, but derated to meet EN1175-1 requirements.
SBE
®
320 DIN Standard Silver Plated Primary Power Wire Contacts
Crimp barrel O.D. are compliant with DIN standard tooling. Will also t into SBX
®
350 housings. Not recommended
for cross mating with above typical contacts for SBE
®
& SBX
®
.
Dimensions
Loose Piece - A - - B - - C - - D -
AWG mm² ----- Part Numbers ----- inches mm inches mm inches mm inches mm
Minimum Quantity ... 200 50 ...............................................................................................................
3/0 95 1341G3-BK 1341G3 * 2.89 73.41 0.78 19.81 0.59 14.99 0.94 23.88
2/0 70 1341G2-BK 1341G2 * 2.74 69.60 0.68 17.27 0.51 12.95 0.79 20.07
1/0 50 1341G1-BK 1341G1 * 2.65 67.31 0.57 14.48 0.43 10.92 0.79 20.07
* Sold as pairs. 2 parts shipped for every 1 part ordered.
Protection
Touch Safety Main Connector Housing
IEC 60950 SBE
®
320 Only Pass
IEC 60529 SBE
®
320 & SBX
®
350 IP20
Unmated
Mated
Connector
Series
Configurations
Creepage/Clearance
per IEC 60950-1
IIIa
Material
Group
SBE®320
5.6 mm
24.7 mm