Datasheet
- 95 -
All Data Subject To Change Without Notice
www.andersonpower.com
SECTION 3
SBE
®
320 / SBX
®
350
[ 8.4 ]
0.33
[ 10.9 ]
0.43
[ 3.8 ]
0.15
[ 41.3 ]
1.62
[ 1.60 ]
Ø 0.06
ID
Retention Clip
L1
L
Socket
Insert
[ 19.6 ]
0.77
[ 2.6 ]
0.10
Retention
Clip
ID
Auxiliary Pin - L - - L1 -
Contact Lengths in. mm in. mm
Standard Length 7.7mm 0.77 19.6 0.30 7.7
Pre-Mate 9.3mm 0.83 21.2 0.37 9.3
Post-Mate 6.4mm 0.72 18.3 0.25 6.4
Auxiliary Socket Contacts
Crimp Barrel ID
Wire Gauge in. mm.
#24 / 20 0.04 1.1
#20 / 16 0.07 1.7
#16 / 14 0.08 2.1
#12 0.10 2.6
Socket
Locations
Powerpole
®
Auxiliary
Powerpole
®
auxiliary connectors are rated up to 30 amps 600 volts and can be used for auxiliary
power, control or sensing. The auxiliary kit includes (1) each black and red Standard Powerpole
®
housing, (2) contacts, (2) zip cable straps, and (2) retaining pins. (1) Retaining clip can be
substituted for (2) retaining pins.
Description ---- Part Numbers ----
Minimum Quantity ......................................... 200 25 ...
Powerpole
®
Auxiliary Kit #16 to #12 Contact - 6305G1
Powerpole
®
Auxiliary Kit #20 to #16 Contact - 6310G1
Black Powerpole
®
Housing 1327G6 -
Red Powerpole
®
Housing 1327 -
#16 to #12 Contact 1331 -
#20 to #16 Contact 1332 -
1x4 Auxiliary Connector
The unique 1x4 auxiliary connector allows up to 4 auxiliary circuits up to 20 amps 150 volts
each in SBE
®
, SBO
®
, & SBX
®
housings. The genderless design holds two each of the gold
plated pin & socket contacts. This innovation allows the very durable and cost effective design
of SBE
®
,O,X connectors to substitute for DIN 43589-1 applications where 4 auxiliary contacts
are required. Multiple pin lengths allow the further benet of sequencing between circuits. (2)
Retaining pins or (1) Retaining clip is required to hold the auxiliary housing in place. Auxiliary
Kits include (1) Auxiliary Housing, (2) Standard Length Pin Contacts, (2) Socket Contacts, (2)
Retaining Pins and (1) Retaining Clip.
Description AWG mm² ----------- Part Numbers -----------
Minimum Quantity .................................................. 1,000 250 25 ....
1x4 Auxiliary Kit 12 4 - - 440G3
1x4 Auxiliary Kit 16 to 14 1.5 to 2.5 - - 440G1
1x4 Auxiliary Kit 20 to 16 0.75 to 1.5 - - 440G2
1x4 Auxiliary Housing Contacts Sold Seperately 3-5956P1 444G1 -
Pin Contacts for 1x4 Auxiliary Connector
Gold plated contacts are available in 4 lengths to allow sequencing of circuits.
Description AWG mm² ----------------- Part Numbers ----------------
Minimum Quantity .................................................... 500 50 ...........
Standard Length 7.7mm 12 2.5 PM16P12S30 PM16P12S30-50
16 to 14 1.0 to 1.5 PM16P1416S30 PM16P1416S30-50
20 to 16 0.75 to 1.0 PM16P1620S30 PM16P1620S30-50
24 to 20 0.50 to 0.75 PM16P2024S30 PM16P2024S30-50
Pre-Mate 9.3mm 12 2.5 PM16P12A30 PM16P12A30-50
16 to 14 1.0 to 1.5 PM16P1416A30 PM16P1416A30-50
20 to 16 0.75 to 1.0 PM16P1620A30 PM16P1620A30-50
24 to 20 0.50 to 0.75 PM16P2024A30 PM16P2024A30-50
Post-Mate 6.4mm 12 2.5 PM16P12C30 PM16P12C30-50
16 to 14 1.0 to 1.5 PM16P1416C30 PM16P1416C30-50
20 to 16 0.75 to 1.0 PM16P1620C30 PM16P1620C30-50
24 to 20 0.50 to 0.75 PM16P2024C30 PM16P2024C30-50
Socket Contacts for 1x4 Auxiliary Connector
Selectively gold plated contacts offer low resistance and durability up to 10,000 mating cycles.
Description AWG mm² -------------------- Part Numbers -------------------
Minimum Quantity .................................. 500 50 .............
Socket Contact 12 2.5 PM16S12S32 PM16S12S32-50
16 to 14 1.0 to 1.5 PM16S1416S32 PM16S1416S32-50
20 to 16 0.75 to 1.0 PM16S1620S32 PM16S1620S32-50
24 to 20 0.50 to 0.75 PM16S2024S32 PM16S2024S32-50