Datasheet

- 96 -
All Data Subject To Change Without Notice
www.andersonpower.com
SECTION 3 SBE
®
320 / SBX
®
350
4803G3
4802G3
4827G6
Socket Locations
A
B
SBE
®
Air Tubes
Air tubes t into SBE
®
housings to allow electrolyte circulation while charging the battery. Genderless
tube design allows the same part to be used on both sides. (2) Retaining pins or (1) Retaining
clip is required to hold the air tube in place. Retaining pins are included in Air Tube Kit.
Description ---- Part Numbers ----
Minimum Quantity .... 500 25 ...
Air Tube Kit, Black - 6396G1
Air Tube Only 3-5798P1 -
PPMX Auxiliary Connector
The PPMX auxiliary connector allows up to 8 auxiliary circuits to be used in the SBE
®
, SBO
®
, &
SBX
®
housings. There are 4 auxiliary circuits per PPMX connector and two PPMX housings t
into the auxiliary port in the main connector housing. Rated up to 7 amps 300 volts per contact, the
genderless design holds two each gold plated pin & socket contacts. This innovation allows the very
durable and cost effective design of SBE
®
, O, X connectors to be used for applications requiring
up to 8 battery monitoring or equipment vehicle communication circuits. (2) Retaining pins or (1)
Retaining clip is required to hold the auxiliary housing in place.
Auxiliary Kits includes: (1) Auxiliary Housing, (2) Pin Contacts, and (2) Socket Contacts.
Description AWG mm² ----------- Part Numbers -------------
Minimum Quantity ................................................. 1,000 100 25 .....
PPMX Auxiliary Kit 24 to 20 0.50 to 0.25 - 4850G6 -
1x4 Auxiliary Housing Contacts Sold Separately 4827G6-BK - 4827G6
Pin & Socket Contacts for PPMX Auxiliary Connector
Gold plated contacts are ideal for signal or low power use with durability up to 5,000 mating cycles.
Description AWG mm² ------ Part Numbers ------
Minimum Quantity ............................................... 2,000 50 ...
Pin Contacts 24 to 20 0.50 to 0.25 4803G3-BK 4803G3
Socket Contacts 24 to 20 0.50 to 0.25 4802G3-BK 4802G3
Retaining Clip
Retaining clips can be used in place of two retaining pins to
hold auxiliary connectors or air tubes. Allows easier removal
of auxiliary modules.
Description -- Part Number --
Minimum Quantity ............. 100 .......
For SBE
®
320 & SBX
®
350 2-8675P1
Retaining Pins
Retaining pins are used to hold accessories in the auxiliary port in SBE
®
, SBO
®
, & SBX
®
housings. Dimension “B” is +/- 0.015 in or 0.38 mm.
Dimensions
- A - - B -
Description - Part Number - inches mm inches mm
Minimum Quantity ............... 1,000 ...............................................................................
For SBE
®
320 & SBX
®
350 110G59-BK 0.093 / 0.103 2.36 / 2.62 1.000 25.40