Datasheet
All Data Subject To Change Without Notice
| SBS™ MINI SPECIFICATIONS |
| TEMPERATURE CHARTS |
NOTE: Temperature rise charts are based on a 25°C ambient temperature.
Mechanical
Wire Size Range AWG mm²
20 to 10 0.75 to 4.0
Max. Wire Insulation Diameter in. mm
0.183 4.65
Operating Temperature ˚F ˚C
-4˚ to 221˚ -20˚ to 105˚
Mating Cycles No Load by Plating Silver (Ag) Tin (Sn)
10 - 12 AWG 1,500 200
14 - 18 AWG 8,000 200
Avg. Mating / Unmating Force
4
Lbf. N
10 AWG 10 to 11 45 to 49
12 to 18 AWG 4 to 7 17 to 31
Min Contact / Spring Retention Force Lbf. N
20 90
¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP
®
recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the
maximum operating temperature. CSA rating below a 30°C temperature rise.
2
Use APP
®
recommended tooling only. Alternate tools may adversely affect the
performance of our connectors along with UL and CSA recognition.
3
Based on 261G3 with 10 AWG wire.
4
Contact customer service for contacts with a higher disconnect force.
Protection
Touch Safety
UL 1977 Sec. 10.2 Pass
IEC 60950 Pass
IEC 60529 IP20
Materials
Housing
Plastic Resin Polycarbonate
Contact Retention Spring Stainless Steel
Housing Flammability Rating
UL94 V-0
Contact
Base Copper Alloy
Plating Tin or Silver
Contact Termination Methods
Crimp³ Wire Contacts
Hand Solder 1331 & 1332
Electrical
Current Rating Amperes¹ UL 1977 CSA
10 AWG 52 35
12 AWG 41 28
14 AWG 31 23
16 AWG 24 16
18 AWG 20 15
Voltage Rating AC/DC
UL 1977 600
Dielectric Withstanding Voltage
Volts AC 2,200
Avg. Mated Contact Resistance Milliohms
2
Wire Contact with 5/8” of #16 AWG 0.875
Wire Contact with 5/8” of #12 AWG 0.600
Wire Contact with 5/8” of #10 AWG 0.525
UL Hot Plug Current Rating Amperes
3
250 cycles at 72V DC 45A
SBS
™
Mini
Temperature Rise at Constant Current
Amperes Applied
Temperature (°C)
10 AWG 12 AWG 14 AWG
16 AWG 18 AWG
0
10
20
30
40
50
60
0 10 20 30 40 50 60
SBS™ Mini
Derating vs. Ambient Temperature
Ambient Temperature (°C)
25
50
75
100
125
0 10 20 30 40 50 60 70
Amperes Maximum
10 AWG 12 AWG 14 AWG
16 AWG 18 AWG
Inquire with Customer Service
for IEC / EN Approvals
www.andersonpower.com - 3 -