Datasheet

ManualsBrandsAnderson Power Products ManualsBattery Connector HousingsHousing, Neutral

www.andersonpower.com

- 77 -

All Data Subject To Change Without Notice

| SBE

80 / SBO

60 ORDERING INFORMATION |

SBE

80 / SBO

60 Connectors

- up to 80 Amps

SBE

80 / SBO

60 Housings

The smallest size of SBE

, X, O style housing. SBE

80 and SBO

60 housings of the same

Voltage Color Code can be mated but is not recommended as it invalidates UL approvals for

SBO

60. SBO

60 housings do not meet EN1175-1 requirements for industrial trucks.

Voltage

Color

Description Code ----- SBE

80 Part Numbers ----- ----- SBO

60 Part Numbers -----

Minimum Quantity .... 400 25 400 25 ......

Yellow 12V SBE80YEL-BK SBE80YEL SBO60YEL-BK SBO60YEL

Orange 18V SBE80ORN-BK SBE80ORN SBO60ORN-BK SBO60ORN

Red 24V SBE80RED-BK SBE80RED SBO60RED-BK SBO60RED

Gray 36V SBE80GRA-BK SBE80GRA N/A N/A

White 144V N/A N/A SBO60WHT-BK SBO60WHT

SBE

80 / SBO

60 Silver Plated Primary Power Wire Contacts

Use two silver plated contacts per housing for the best electrical performance and

durability up to 10,000 mating cycles. See reducing bushings in accessory

section for smaller wire size

Dimensions

Mating - A - - B -

AWG mm² Force - Loose Piece Part Numbers - inches mm inches mm

Minimum Quantity ........... 1,000 100 ...................................................

4 25 Low 1339G4-BK 1339G4 * 0.28 7.11 0.35 9.0

6 16 High 1339G1-BK 1339G1 * 0.22 5.59 0.29 7.3

* Sold as pairs. 2 parts shipped for every 1 part ordered.

[ 39.4 ]

1.55

[ 13.0 ]

0.51

[ 7.6 ]

0.30

SBE

and SBO

connectors build on the capability of

the two pole SB

connectors by offering up to 8 auxiliary

power / signal contacts along with an IEC 60950 touch

safe housing. The center of the main connector features

a connector holder for either: two PP15-45, two PPMX, or

APP’s innovative 1x4 auxiliary connector.

• Touch Safe Interface

Minimizes potential contact with live circuits per IEC 60950

• Up to 8 Last Mate / First Break Auxiliary’s

Enables intelligent power switching, CAN and interlock loop

circuitry, as well as power up to 20 amps per pole

• Silver Plated Wire Contacts up to #4 (25 mm²)

Allows UL rated currents up to 80 amps per pole

[ 112.2 ]

4.42

[ 46.0 ]

1.81

[ 14.6 ]

0.58

[ 49.5 ]

1.95

[ 5.1 ]

0.20

[ 58.9 ]

2.32

[ 26.3 ]

1.03

[ 69.6 ]

2.74

Mated Length

Side View

Top View

SECTION 3

SBE

80 / SBO

Summary of content (6 pages)

PAGE 1
SBE®80 / SBO® 60 Connectors - up to 80 Amps SBE® and SBO® connectors build on the capability of the two pole SB® connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing. The center of the main connector features a connector holder for either: two PP15-45, two PPMX, or APP’s innovative 1x4 auxiliary connector.
PAGE 2
| SBE®80 / SBO®60 CONNECTOR SPECIFICATIONS | Mechanical SECTION 3 SBE® 80 / SBO®60 Electrical Wire Size Range AWG mm² Current Rating Amperes¹ SBO60 SBE80 Power Contacts 16 to 6 1.3 to 13.3 Primary Power (6 AWG) 70 80 Auxiliary Contacts 24 to 10 0.25 to 5.3 20 20 Powerpole® Auxiliary (12 AWG) 1x4 Auxiliary (12 AWG) 20 20 Max. Wire Insulation Diameter in. mm PPMX Auxiliary (20 AWG) 7 UL 5 CSA Power Contacts 0.440 11.200 0.175 4.
PAGE 3
| SBE®80 / SBO®60 CONNECTOR TEMPERATURE CHARTS| SBE®80 / SBO®60 Temperature Rise at Constant Current 60 125 Temperature (°C) Temperature (°C) 50 40 30 20 SBE®80 / SBO®60 Derating vs. Ambient Temperature 100 75 50 10 0 25 0 10 20 30 40 50 60 70 Amperes Applied 6 AWG 10 AWG 80 90 8 AWG 12 AWG 0 10 20 30 40 50 60 70 80 90 100 Amperes Applied 6 AWG 10 AWG 8 AWG 12 AWG NOTE: Temperature rise charts are based on a 25°C ambient temperature.
PAGE 4
1x4 Auxiliary Connector APP®’s unique 1x4 auxiliary connector allows up to 4 auxiliary circuits up to 20 amps 200 volts each in SBE®, SBO®, & SBX® housings. The genderless design holds two each of the gold plated pin & socket contacts. This innovation allows the very durable and cost effective design of SBE®,O,X connectors to substitute for DIN 43589-1 applications where 4 auxiliary contacts are required. Multiple pin lengths allow the further benefit of sequencing between circuits.
PAGE 5
NEW Pin & Socket Contacts for PPMX Auxiliary Connector Gold plated contacts are ideal for signal or low power use with durability up to 5,000 mating cycles. Description AWG mm² Minimum Quantity ............................................... Pin Contacts 24 to 20 0.50 to 0.25 Socket Contacts 24 to 20 0.50 to 0.25 ------ Part Numbers -----2,000 50 ... 4803G3-BK 4803G3 4802G3-BK 4802G3 4802G3 4803G3 NOTE: Contacts sold individually, not sold as a set of two.
PAGE 6
SBO® / SBE® / SBX® - Tooling Information W ire Size Loose Piece Part Numbers AWG mm² Contacts 300 MCM 152 6358 4/0 AWG 107.2 6356 3/0 AWG 85 6355 2/0 AWG #2 67.