Additional Info

ManualsBrandsAnderson Power ManualsCableAnderson PP180 Black Housing for 2/0

- 52 -

All Data Subject To Change Without Notice

www.andersonpower.com

PP180 ORDERING INFORMATION

Powerpole

Connector

PP180 - Up to 350 Amps

PP180 are the largest of the Powerpole

series

housings. They are designed to accommodate up to

3/0 (70 mm²) wires and handle high currents up to 350

amps. Busbar contacts are also available for power

inputs and takeos. Color-coded housings minimize

user confusion and the potenal of cross mang circuits.

• Low Resistance Silver Plated Copper Contacts

Allows currents up to 350 amps

• UL Rated for Hot Plugging up to 75 Amps

Great for battery or other applications where the ability to

interrupt circuits is required

• Busbar Contacts Work with Standard Housings

Provides a hot swappable quick disconnect system for

busbar power distribution

PP180 Housings

The largest Powerpole

housing can be used with wire

contacts for up to 3/0 AWG (85 mm²) or busbar contacts.

Description Part Numbers

Minimum Quantity 250 50

Red 1381G3-BK 1381G3

Green 1381G4-BK 1381G4

Black 1381G1-BK 1381G1

White 1381G2-BK 1381G2

Blue 1381-BK 1381

PP180 Silver Plated Wire Contacts

Silver plated contacts o󰀨er superior electrical performance and durability up to 10,000 mating cycles. New contacts for 2/0 to 3/0 AWG

(70 to 85 mm²) o󰀨er extended capability in the same housings. See Reducing bushings in accessory section for smaller wires.

Dimensions

Mating - A - - B - - C - - D -

AWG mm² Force Loose Piece Part Numbers inches mm inches mm inches mm inches mm

Minimum Quantity 500 300 250 50

3/0 85 Low - - 1328G2-BK 1328G2 * 2.35 59.69 0.70 17.78 0.58 14.73 1.04 26.42

2/0 67.4 Low - 1328G1-BK - 1328G1 * 2.35 59.69 0.64 16.26 0.49 12.45 1.04 26.42

1/0 53.5 High 1382-BK - - 1382 2.35 59.69 0.52 13.21 0.44 11.18 1.04 26.42

1 42.4 High 1347-BK - - 1347 2.35 59.69 0.52 13.21 0.39 9.91 1.04 26.42

2 33.6 High 1383-BK - - 1383 2.35 59.69 0.52 13.21 0.35 8.89 1.04 26.42

4 21.1 High 1384-BK - - 1384 2.35 59.69 0.52 13.21 0.30 7.62 1.04 26.42

6 13.3 High 1348-BK - - 1348 2.10 53.34 0.37 9.40 0.22 5.59 0.80 20.32

* Extended range

[ 12.70 ]

050

[ 82.6 ]

3.25

[ 129.7 ]

5.5

[ 30.0 ]

1.18

[ 28.6 ]

1.13

[ 28.6 ]

1.13

Front View Mated Length

POWERPOLE® PP180

Busbar

Housing & Wire Contact

Summary of content (6 pages)

PAGE 1
Powerpole® Connector PP180 - Up to 350 Amps PP180 are the largest of the Powerpole® series housings. They are designed to accommodate up to 3/0 (70 mm²) wires and handle high currents up to 350 amps. Busbar contacts are also available for power inputs and takeoffs. Color-coded housings minimize user confusion and the potential of cross mating circuits.
PAGE 2
PP180 Silver Plated Busbar Contacts Use 1 busbar contacts per housing to provide a quick disconnect input or output busbar connection. Busbar contacts are for mating with wire contacts only. Part number 180BBS includes lock nuts. Locknuts must be ordered separately for 180BBS-BK. Mating Thread Force Minimum Quantity High Busbar 1/4-20 Lock Nut 1/4-20 N/A See Busbar contact drawing on website for further detail. [ 109.7 ] 4.3 [ N/A ] 1/4-20 [ 25.4 ] 1.0 [ 2.7 ] 0.
PAGE 3
PP180 SPECIFICATIONS ELECTRICAL MECHANICAL Current Rating Amperes ¹ UL 1977 CSA Singlepole (Wire-to-Wire) (3/0 AWG) 350 230 2x2 Block (Wire-to-Wire) (3/0 AWG) 350 Singlepole (Wire-to-Busbar) (1/0 AWG) 180 Wire Contacts with Bushings Max. Wire Insulation Diameter Voltage Rating AC/DC Operating Temperature ² UL 1977 600 Dielectric Withstanding Voltage POWERPOLE® PP180 Wire Size Range Mating Cycles No Load by Plating Volts AC 2,200 Avg.
PAGE 4
POWERPOLE® PP180 ACCESSORIES Mounting Clamp Mounting clamps can be used for fastening a block of Powerpole® 180 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included. Description Minimum Quantity 2 Pole 3 Pole Part Numbers 20 sets of 2 1465G1 1465G2 Mounting Clamp Panel 2 Pole 3 Pole POWERPOLE® PP180 Retaining Pins Retaining pins are used to keep stacked Powerpole® 180 series housings from separating.
PAGE 5
Powerpole® Tooling Information - APP® Applicators are Mechanical Feed Style and do not Require an Air Feed Kit. Wire Size AWG Loose Piece Part Number mm² Tin Plating Silver Plating Loose Piece Contact Crimp Tools Hand Tool OR Pneumatic Bench Tool + Die + Locator Number of Crimps N/A Single POWERPOLE® TOOLING PP15 / 45 Flat Wiping Power & Ground 16 to 20 1.3 to 0.52 N/A 1332 12 to 16 3.3 to 1.3 1331 16 to 20 1.3 to 0.52 262G1-LPBK 262G2-LPBK 16 to 20 1.3 to 0.
PAGE 6
Wire Size Reeled Part Number AWG mm² Tin Plating Silver Plating 16 to 20 1.3 to 0.52 262G1 262G2 16 to 20 1.3 to 0.52 269G2 N/A 12 to 16 3.3 to 1.3 261G1 N/A 10 to 14 5.3 to 2.1 261G2 261G3 12 to 16 3.3 to 1.3 269G1 N/A 10 to 14 5.3 to 2.1 269G3 N/A 10 to 14 5.3 to 2.1 200G1L 200G3L 10 to 14 5.3 to 2.1 201G1H N/A 10 to 14 5.3 to 2.