Additional Info

- 54 -
All Data Subject To Change Without Notice
www.andersonpower.com
IEC INFORMATION
ATTRIBUTES PP180
AMP Rang AC/DC 180
Voltage Rang AC/DC (Steady State) 500 V AC/DC (Operaonal)
Breaking Capacity - AMP Rang / Cycles 180 Amp / 10 Cycles
Voltage Rang (Breaking Capacity) 220 VDC
FINGER Safety - Mated Only IEC 60529 - IP20
Wire Size Tested 70 mm²
Contact Series Tested 1382G2
Climac Tesng (Cold, Heat & MFG) IEC 60512 Test -11j, 11i & 11g
Cycle Life IEC 60512 Test 9a - 5,000
Cycles
Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches -
Dropped 8 mes
Temperature Range -20°C to 105°C
-4°F to 221°F
Connector
Series
Conguraons
Creepage /
Clearance
per IEC
60950-1
Material
Group
PP180
Single Pole Unmated 6.02 mm
IIIa
Mated 6.02 mm
Stacked
Powerpole®
Unmated 6.02 mm
Mated 6.02 mm
PROTECTION
Touch Safety with Wire Contacts
IEC 60529 IP10
POWERPOLE® PP180
PP180 SPECIFICATIONS
NOTE 1: See IEC 60664-1 for working voltage.
NOTE 2: Amp rangs are stated per posion and based on all posions being
fully loaded.
1 - Based on: 105°C rated or beer cable of the largest size, Properly
calibrated APP® recommended tooling, and a 25°C ambient temperature.
UL rang not to exceed the maximum operang temperature. CSA rang
below a 30°C temperature rise.
2 - Limited by the thermal properes of the connector plasc housing.
3 - Use APP® recommended tooling only. Alternate tools may adversely aect
the performance of our connectors along with UL and CSA recognion.
4 - Based on 2 housings blocked together.
ELECTRICAL
Current Rang Amperes ¹ UL 1977 CSA
Singlepole (Wire-to-Wire) (3/0 AWG) 350 230
2x2 Block (Wire-to-Wire) (3/0 AWG) 350
Singlepole (Wire-to-Busbar) (1/0 AWG) 180
Voltage Rang AC/DC
UL 1977 600
Dielectric Withstanding Voltage
Volts AC 2,200
Avg. Mated Contact Resistance Milliohms ¹ 0.100
6” of 1/0 AWG Wire
UL Hot Plug Current Rang Amperes
4
250 Cycles at 120V DC 75A
MATERIALS
Housing
Plasc Resin Polycarbonate
Contact Retenon Spring Stainless Steel
Housing Flammability Rang
UL94 V-0
Glow Wire 960°C (GWFI) / 850°C (GWIT)
Contact
Base Copper Alloy
Plang Silver
Contact Terminaon Methods
Crimp ³
Hand Solder
Wrench / Socket *
* Busbar Contacts Only
MECHANICAL
Wire Size Range AWG mm²
Wire Contacts with Bushings 10 to 3/0 5.3 to 85
Max. Wire Insulaon Diameter in. mm
0.900 22.860
Operang Temperature ² °F °C
-4° to 221° -20° to 105°
Mang Cycles No Load by Plang Silver (Ag) N
Wire and Busbar Contacts 10,000 44
Avg. Mang / Unmang Force Lbf. N
Wire & Busbar Contacts 10 44
Min. Contact / Spring Retenon Force Lbf. N
120 534