User manual

English Svenska Norsk
14
Channel Settings
Antenna
Press the MENU button to display the main menu. Press
the / buttons to select CHANNEL and then press the
OK button. Press the  button and then press the /
buttons to select Air or Cable,then press OK.
Auto Scan
Press the / buttons to select Auto Scan and then
press the OK button.
In the Auto Scan menu. Press the  /  /  / buttons to select
the country where you will operate the TV and the Tune Type:
ATV+DTV/DTV/ATV. Press the OK button to start auto tuning.
(Note: If you select DVB-C in the Installation Guide Menu
you can select the option: scan type/Frequency/Network
Symbolks.)
Channel tuning will commence. This operation may take up to
several minutes. The display will show the progress of the tuning and
the number of channels
found.
If you want to skip the ATV tuning, press the MENU button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the  button to select YES to confirm. You will then go straight
to DTV tuning. You may repeat the above step if you also want to
skip the DTV tuning. An installation reminder will appear the next
time you turn on the TV.
ATV Manual Tuning (ATV Mode)
Press the MENU button to display the main menu. Press
the  /  buttons to select CHANNEL and then press the
OK button. Press the  / buttons to select ATV Manual
Tuning and then press the OK button. The ATV Manual
Tuning screen will pop up. Use the  / buttons to select
the following options and the  /  buttons to adjust the
setting.
Customizing TV Settings