User manual

English Svenska Norsk

Customizing TV Settings

Picture Settings

1. Press the MENU button to display the main menu.

2. Press the  buttons to select PICTURE and then press the OK button.

3. Press  the buttons to select the option you want to adjust in PICTURE menu.

4. Press the   buttons to adjust each option’s setting.

5. Press the EXIT button to exit the menu.

Picture Mode Cycles among picture mode: Standard / Mild / User / Dynamic.

Alternative: you may press the P.MODE button to select the picture mode

directly.

Contrast Adjusts the difference between light and dark levels in the picture. (For User

mode)

Brightness Increases or decreases the amount of white in the

picture. (For User mode)

Color Controls the color intensity. (For User mode)

Sharpness Adjusts the level of crispness in the edges between light and dark areas of the

picture. (For User mode)

Tint

(For NTSC format)

Adjust the balance between red and green levels. (Tint is only available for

NTSC signal input via the SCART or AV IN.)

Color Temperature Cycles among color temperatures: Medium / Warm / Cool.Adjusts the color

components independently to achieve a warm or cool. (For User mode)

• Warm: increase red tint • Medium • Cool: increase blue tint

Aspect Ratio Allows you to watch the screen in various picture formats: 16:9/ Zoom1 /

Zoom2 / Just Scan(Only HDMI Mode) / Auto / 4:3.

Noise Reduction Reduces the noise level of the connected device: Middle/ High/ Off/ Low.

PC Setup Adjusts the PC desktop content.