User manual

English Svenska Norsk

Lock Settings

1. Press the MENU button to display the main menu. Press the  buttons to select LOCK and

then press the OK button.

2. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. Enter the default

password “0000” for the ﬁrst time use.

3. Press  the buttons to select the option you want to adjust in LOCK menu.

4. Press the   buttons to adjust each option’s setting.

5. Press the EXIT button to exit the menu.

Enable Locks The Enable Locks is designed to prevent accidental returning of the TV / losing

channels and prevent children watching unsuitable programme.

The Enable Locks must be set to On for this function to operate. If the Enable

Locks is set to On, a valid password must be entered when you access Auto

Scan / Manual Tuning / Programme Edit / Restore Factory

Default.

Set Password Use the 0-9 buttons to input the old password and then input the new 4-digit

password. Re-enter new password for conﬁrmation.

Note: the default password is “0000”.

If you change the password, be sure to remember the new password. If you

forget the new password, enter the master password “8899”.

Block Program Block Program is designed to prevent children watching unsuitable pro-

grammes. When a channel is blocked, a valid password must be entered.

Parental Guidance This function allows you to set up blocking schemes to block speciﬁc channels

and ratings. Press the  buttons to select an age rating: Off, 4-18.

Customizing TV Settings