User Manual

Page 13 of 27
blood glucose meter. Discard the used test strips directly into the waste container
Discard the Used Lancet
Discard the used lancet directly into a container designed for sharp objects. Always wash hands
thoroughly with soap and water after handling the meter, lancing device, test strips.
Note: Please consult a healthcare professional for interpretation of blood glucose measurements.
Online measurement mode：(with iOS device)
Apply the Test Strip
Take a test strip from its vial. You may touch the test strip anywhere on its surface with clean dry
hands. Do not bend, cut or modify the test strips in any way. Use each test strip immediately after
removing it from the vial.
Insert the test strip into the test port of the glucose meter.
If this is your IOS device's Bluetooth function in the open mode, then the blood glucose meter will
automatically connect the IOS device, and enter the online measurement mode.
Blood glucose meter line measurement mode only display the Bluetooth symbol.
Obtaining a Blood Sample
The detailed procedure reference iHealth Lancing Device
Apply Your Blood Sample
Apply your blood to the blood sample area of the test strip, making sure the sample area is fully
covered with your blood sample. Your iOS device will beep when you should remove the test strip