User Manual

Page 15 of 27

Material needed:

iHealth Wireless Smart Gluco-Monitoring System (BG5)

iHealth AGS-1000I Blood Glucose Test Strip

Control Solution

Perform Control Solution test when:

First receiving the meter

Checking the meter and test strips at least once a week

Using a new vial of test strips

You suspect the meter or test strips are not working properly

Your blood glucose test results are not consistent with how you feel, or if

you think the results are not accurate

Practicing the testing process

The meter has been dropped or damaged

Performing an Offline Control Solution Test with Meter Alone (not using

iOS device)

When taking a Control Solution Test with meter alone, it is important to set the

test mode to “CTL,” so that the result will not be mixed up with your regular test

results. Control Solution Test results will not be saved in the meter’s memory.

Please follow the instructions below.

Step 1: Insert the test strip to turn on the meter

Insert the test strip in the meter’s Strip Port, and wait for the Blood Sample

Symbol to appear in the meter display.

Step 2: Press the Memory Button to turn on the control (“CTL”) mode.

When the “CTL” symbol appears, the meter is in control

ode and will not save this test results in memory.

Step 3: Press the “Memory Button” again to turn off the

“CTL” mode and switch back to the regular testing

mode. When the “CTL” symbol disappears from the

meter display, the meter is in regular testing mode and subsequent tests will

not be treated as a control solution test.

Step 4: Apply Control Solution

•

Shake the Control Solution vial before each use.

•

Squeeze a drop of Control Solution and place it in the vial cap. For

better results, it is recommended that you use the second drop of the

Control Solution (discard the first drop).