User Manual

Page 18 of 27
Online measurement mode：(with iOS device)
Press and hold the Memory Button for 3 seconds to turn the
meter on. Enable the Bluetooth function on your iOS device.
When the “ ” symbol appears, the meter is in Bluetooth
communication mode.
You may perform a test even when the meter is not connected to
your iOS device via Bluetooth, and the meter will save up to 500
test results. launch the App and follow the on-screen instructions.
Test results will be transmitted to the App with date and time. If
the Bluetooth function disconnected, the meter will automatically shut off.
REFERENCE VALUE OF THE IHEALTH WIRELESS SMART GLUCOSE METER
Time of day
People without diabetes
Fasting and before meals
<100 mg/dL
2 hours after meals
<140 mg/dL
Source: (1) American Diabetes Association: Diagnosis and Classification of Diabetes Mellitus
(Position Statement). Diabetes Care 34 (Supp. 1) S66, 2011.
(2) Tietz Fundamentals of Clinical Chemistry, 6th Edition, Edited by Burtis CA and Ashwood ED, W.
B. Saunders Co., Philadelphia, PA, 2008, p. 849.
Please consult your healthcare provider to determine a target range that is best for you.
COMPARING GLUCOSE METER TEST RESULTS WITH LABORATORY RESULTS
The Wireless Smart Glucose Meter provides you with whole blood equivalent results. The result you
obtain from your glucose meter may differ somewhat from your laboratory results due to normal
variation. The Wireless Smart Glucose Meter results can be affected by factors and conditions that do
not affect laboratory results in the same way. To make an accurate comparison between the Wireless
Smart Glucose Meter and laboratory results, follow the guidelines below.