Manualshelf

User Manual

ManualsBrandsAndon Health ManualsElectronicsSpread Spectrum Transmitter
12345678910
Note: Please consult a health care professional for interpretation of blood pressure
measurements.
Important: Please consult a healthcare professional for interpretation of blood pressure
measurements.
1. Product name: Wireless Blood Pressure Monitor
2. Model: BP5
3. Classification: Internally powered, Type BF applied part, IPX0, No AP or APG, Continuous
operation
4. Machine size: approx. 5.7” x 2.3” x 1.2”(145mm × 58mm × 30mm)
5. Cuff circumference: 8.6”-16.5”(22cm-42cm), 16.5”-18.9”(42cm-48cm) (XL size sold
separately)
6. Weight: approx. 4.8oz (135g) (excluding cuff)
7. Measuring method: Oscillometric method, automatic inflation and measurement
8. Memory volume: 120 times with time and date stamp (off-line measurement only)
9. Power: DC: 5V 1.0A,
Battery: 1*3.7V Li-ion 400mAh
10. Measurement range:
Cuff pressure: 0-300 mmHg
Systolic: 60-260 mmHg
Diastolic: 40-199 mmHg
Pulse rate: 40-180 beats/minute
SPECIFICATIONS
Operation Instructions With iOS Device
For detailed operating instructions, please visit http://www.ihealthlabs.com.
During measurement, press the “START/STOP” button to stop measurement, press the
“START/STOP” button for 2 seconds to turn off the monitor manually.
Measuring without an iOS Device
Offline measurement is enabled automatically at your first online measurement. To start offline
measurement when disconnected from the iOS device, turn on the monitor by pressing the
“START/STOP” button. The status indicator light will be green and the monitor will begin measure-
ment. If measured successfully, the measurement will be stored in the iHealth Wireless Blood
Pressure Monitor and the status indicator light will flash green. The reading is not visible until the
next iOS connection. The measurement will be uploaded to the device automatically
7 8
Monitor Status Bluetooth Indicator
Waiting to connect Flashing blue light
Measuring Steady blue light
Measurement completed Gradually extinguishing light
upon the next iOS connection. Otherwise the status indicator will be red for a moment then
change to flashing green. The monitor will turn off automatically after 2 minutes of
non-operation. Alternatively, you can keep on pressing the “START/STOP” button for 2
seconds to turn off the monitor manually.
During measurement, press the “START/STOP” button to stop the measurement process.