User`s guide

FUNCTIONS
SDK SECTION 11
Page 117
GetCapabilities (Available Set Functions) - Continued
Capability: AC_SETFUNCTION_BASELINEOFFSET
Description: The baseline offset can be set with the
SetBaselineOffset function.
Bit: 8
State: 1
Capability: AC_SETFUNCTION_PREAMPGAIN
Description: The pre amp gain can be set with the SetPreAmpGain function.
Bit: 9
State: 1
Capability: AC_SETFUNCTION_CROPMODE
Description: Crop mode can be selected using the SetCropMode or SetIsolatedCropMode functions.
Bit: 10
State: 1
Capability: AC_SETFUNCTION_DMAPARAMETERS
Description: The DMA parameters can be set with the SetDMAParameters function.
Bit: 11
State: 1
Capability: AC_SETFUNCTION_HORIZONTALBIN
Description: The horizontal binning can be set for the relative read mode.
Bit: 12
State: 1 See Note.
Capability: AC_SETFUNCTION_MULTITRACKHRANGE
Description: The multitrack horizontal range can be set using the SetMultiTrackHRange function.
Bit: 13
State: 1
Capability: AC_SETFUNCTION_RANDOMTRACKNOGAPS
Description: Random tracks can be set with no gaps inbetween with the SetRandomTracks or
SetComplexImage functions.
Bit: 14
State: 1
NOTE: For iDus, the horizontalbin capability will be 0, as it is not recommended, but it is possible.
Capability: AC_SETFUNCTION_EMADVANCED
Description: Extended EM gain range can be accessed using SetEMAdvanced.
Bit: 15
State: 1