User`s guide

FUNCTIONS
SDK SECTION 11
Page 124
GetDDGPulse
unsigned int WINAPI GetDDGPulse(double width, double resolution, double* Delay, double* Width)
Description
This function attempts to find a laser pulse in a user-defined region with a given resolution.
The values returned will provide an estimation of the location of the pulse.
Parameters
double width: the time in picoseconds of the region to be searched.
double resolution: the minimum gate pulse used to locate the laser.
double* Delay: the approximate start of the laser pulse.
double* Width: the pulse width, which encapsulated the laser pulse.
Return
unsigned int
DRV_SUCCESS
DRV_NOT_INITIALIZED
DRV_ACQUIRING
DRV_ERROR_ACK
Location returned.
System not initialized.
Acquisition in progress.
Unable to communicate with card.
NOTE: Available in iStar.