User`s guide

FUNCTIONS
SDK SECTION 11
Page 199
SetCoolerMode
unsigned int WINAPI SetCoolerMode(int mode)
Description
This function determines whether the cooler is switched off when the camera is shut
down.
Parameters
int mode:
1 – Temperature is maintained on ShutDown
0 – Returns to ambient temperature on ShutDown
Return
unsigned int
DRV_SUCCESS
DRV_NOT_INITIALIZED
DRV_ACQUIRING
DRV_P1INVALID
DRV_NOT_SUPPORTED
Parameters set.
System not initialized.
Acquisition in progress.
State parameter was not zero or one.
Camera does not support
NOTE: Mode 0 not available on Luca R cameras – always cooled to -20.