User`s guide

FUNCTIONS
SDK SECTION 11
Page 234
SetNextAddress
unsigned int WINAPI SetNextAddress(at_32* data, long lowAdd, long highAdd, long len, long
physical)
Description THIS FUNCTION IS RESERVED.
SetNextAddress16
unsigned int WINAPI SetNextAddress16(at_32* data, long lowAdd, long highAdd, long len, long
physical)
Description THIS FUNCTION IS RESERVED.
SetNumberAccumulations
unsigned int WINAPI SetNumberAccumulations(int number)
Description
This function will set the number of scans accumulated in memory. This will only take
effect if the acquisition mode is either Accumulate or Kinetic Series.
Parameters
int number: number of scans to accumulate
Return
unsigned int
DRV_SUCCESS
DRV_NOT_INITIALIZED
DRV_ACQUIRING
DRV_P1INVALID
Accumulations set.
System not initialized.
Acquisition in progress.
Number of accumulates.
See also
GetAcquisitionTimings, SetAccumulationCycleTime, SetAcquisitionMode,
SetExposureTime, SetKineticCycleTime, SetNumberKinetics
SetNumberKinetics
unsigned int WINAPI SetNumberKinetics(int number)
Description
This function will set the number of scans (possibly accumulated scans) to be taken
during a single acquisition sequence. This will only take effect if the acquisition mode is
Kinetic Series.
Parameters
int number: number of scans to store
Return
unsigned int
DRV_SUCCESS
DRV_NOT_INITIALIZED
DRV_ACQUIRING
DRV_P1INVALID
Series length set.
System not initialized.
Acquisition in progress.
Number in series invalid.
See also
GetAcquisitionTimings, SetAccumulationCycleTime, SetAcquisitionMode,
SetExposureTime, SetKineticCycleTime