User`s guide

INSTALLATION
SDK SECTION 2
Page 27
Linux Troubleshooting
If you are having trouble running your camera under the Linux operating system please check the following
before contacting
Technical Support
For PCI,
• Check that the device driver is loaded. Type ‘/sbin/lsmod’ – andordrvlx should be listed.
For USB,
• Check that libUSB is available, ‘whereis libusb’
• Check that the Andor device is listed in the /proc/bus/usb/devices file.
• Check that the relevant device under /proc/bus/usb/00X/00Y has write access for all users.