User`s guide

DETECTOR.INI
SDK SECTION 13
Page 270
DummyHShiftSpeed
DummyHShiftSpeed = a, b, c, d, e
This lists the speeds, in microseconds, at which the charge can be moved in the shift register. These speeds
are used when the charge been shifted in the amplifier does not need to be digitized. This allows faster keep
clean cycles and faster readout when pixel skipping is implemented. Where:
a default speed
b, c, d, e allowed speeds fastest first
DummyVShiftSpeed
DummyVShiftSpeed = a, b, c, d, e
This lists the speeds, in microseconds, at which the CCD rows can be vertically shifted. These speeds are
used during CCD keep cleans. Where:
a default speed
b, c, d, e allowed speeds fastest first
VerticalHorizontalTime
VerticalHorizontalTime = a,b,c,d,e
This lists the time, in microseconds, which must be taken into account when timing calculations are been
done. Where:
a default speed
b, c, d, e allowed speeds fastest first
CodeFile
CodeFile = filename.ext
This gives the file name of the micro-code uploaded to the microprocessor on the plug-in card. This field is
typically PCI_29k.COF for standard systems and PCII29K.COF for I
2
C compatible cards.