User`s guide

DETECTOR.INI
SDK SECTION 13
Page 271
FlexFile
FlexFile = filename.ext
This gives the file name of the logic uploaded to the Field Programmable Gate Array on the plug-in card.
(This field is only used by the PCI version of the system.) This field is typically PCI_FPGA.RBF for standard
systems and PCIIFPGA.RBF for I
2
C compatible cards.
Cooling
Cooling = type
This gives the type of cooling. The type relates back to the cooling section.
Type
Type = type
This value specifies whether the head contains a Standard (0) or a Frame Transfer (1) CCD. The default is
Standard.
FKVerticalShiftSpeed
FKVerticalShiftSpeed = speed
This specifies the “Fast Kinetics” vertical shift speed.
Gain
Gain = a
This specifies whether the system has software controllable Gain/Mode settings.
0 = Not software selectable.
1 = Software selectable.
PhotonCountingCCD
PhotonCountingCCD = a
This specifies whether the system contains a L3 Vision sensor from Marconi
0 = Standard CCD
1 = L3 Vision sensor