User`s guide

DETECTOR.INI
SDK SECTION 13
Page 273
AD2DumpHSSpeed
AD2DumpHSSpeed = default, min, max
This is similar to AD2DataHSSpeed but specifies the readout speeds available when performing a dump (i.e.
discarding) of data from the CCD.
AD2BinHSSpeed
AD2BinHSSpeed = default, min, max
This is similar to AD2DataHSSpeed but specifies the readout speeds available when binning (i.e. summing
values from blocks of neighbouring pixels) data from the CCD.
AD2Pipeline
AD2Pipeline = a, b, c: See PipeLine in the controller section
iXon
Ixon = a
Specifies whether the CCD is an iXon camera; if so the line will read ‘Ixon=1’. If this line is missing the CCD
is not an iXon.
EXAMPLE DETECTOR.INI FILES
DH220
[DH220]
Format=1024,1
DummyPixels=0,0,0,0
DataHShiftSpeed=16,1,2,16,32
DataVShiftSpeed=16,16,0,0,0
DummyHShiftSpeed=16,1,2,16,32
DummyVShiftSpeed=16,16,0,0,0
VerticalHorizontalTime=16,16,0,0,0
CodeFile=Instapda.cof
Pixel=25.0,2500.0
Cooling=Single
DV420
[DV420]
Format=1024,256
DummyPixels=8,8,0,0
DataHShiftSpeed=16,1,2,16,32
DataVShiftSpeed=16,16,0,0,0
DummyHShiftSpeed=16,1,2,16,32
DummyVShiftSpeed=16,16,0,0,0
VerticalHorizontalTime=16,16,0,0,0
CodeFile=Pci_29k.cof
FlexFile = pci_fpga.rbf