User`s guide

SPECIAL GUIDES
SDK SECTION 9
Page 76
Extended NIR
When using Extended is increased. This in turn increases the response of the sensor to these wavelengths
with a QE increase from 40% Near Infra-Red Mode the increased thickness of the silicon on which the CCD
is formed and by manipulating the voltages applied to the silicon substrate, the depth of the region where
red and NIR light can convert to photoelectrons to 60% at 650 nm. If ulSetFunctions bit 7 returns 1 then
Extended NIR mode can be activated by using either the SetOutputAmplifier or the SetHSSpeed functions.
(figure 17).
Figure 17: Example of Extended NIR Pseudo Code