Installation & Assembly

Assembly Instructions
(PLEASE READ CAREFULLY BEFORE ASSEMBLY)
INCANDESCENT TORCHIERE LAMP
IMPORTANT SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PERSONAL INJURY.
- Turn off/unplug and allow to cool before replacing bulb,
cleaning or other maintenance.
- Bulb gets HOT quickly! Touch only switch/plug
when turning on.
- Do not remain in light if skin feels warm.
- Do not look directly at lighted bulb.
- Keep lamp away from materials that may burn.
- Use only with 150W or smaller bulb.
- Do not touch bulb at any time.
ASSEMBLY INSTRUCTtONS
1. Lay out all parts on smooth surface as shown In Illustration.
2 Screw the tube (B) onto the base (A) and tighten.
3. Screw the tube (C) onto the tube (B) and tighten.
4. Screw the tube (D) onto the tube (C) and tighten.
5. Screw the tube (E) onto the tube (D) and tighten.
6. Screw the cup (F) onto the tube (E) and tighten.
7. Loosen out socket ring (H) from socket. Fit lamp shade (G)
onto socket and tighten with socket ring (H).
8. Screw in a 150 Watt bulb ( not included) into socket.
9. Plug into outlet and turn on the Rotary 3-way Switch and enjoy.
MAINTENANCE:
- Light bulb recommended.
Use one E26 150W 3-way Type A bulb. —
- To clean, use soft cloth only.
- Do not use any chemical or abrasive cleaners.
... .... ....... H
V J - *