Assembly Instructions

ManualsBrandsAndover Mills ManualsAccent FurnitureMinerva 39.5" Console Table

We have designed our furniture with you, the customer in mind. Our clear,easy to follow

step by step instructions will guide you through the project from start to finish.

Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of

furniture that will go together smoothly and give years of enjoyment.

Please do not return to the store

1 Drawer Console Table

Summary of content (8 pages)

PAGE 1
Drawer Console Table Assembly Instructions We have designed our furniture with you, the customer in mind. Our clear,easy to follow step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of furniture that will go together smoothly and give years of enjoyment.
PAGE 2
Top Panel Right Side Panel Back Support Bar Support Bar Shelf Right Drawer Side Panel Drawer Back Panel Shelf Drawer Front Drawer Support Bar Items not provided. Assembling the unit with cams and wood dowels. Arrow must face hole. B A Phillips Head Screw Driver Gently screw cam bolt into the threaded anchor. wood dowel and tap halfway into hole. Lightly glue wood dowel and connect to second camlock. into holes.
PAGE 3
Hardware A 17pcs B 17pcs C 4pcs D 13pcs E 4pcs F 1pc Cam Bolt Cam Lock Wooden Dowel Screw Small Screw 3*12 J 4pcs K 2pcs L 8pcs Skinny Wooden Dowel Handle Screw Bolt M 8pcs N 2pcs Lock Nut Handle G 1pc H 2pcs Right Glider Anchor O 2pcs I 2pcs P 8pcs Small Screw 3*15 Please do not use any power tools in the assembly of this item.Use of power tools may cause damage and void manufacture warranty.
PAGE 4
Needed Parts Step 1 ① ② screws (E). screws (E). 1 2 E×4 F×1 G×1 Needed Parts Step 2 screws (D).
PAGE 5
Needed Parts Step 3 cambolts 4 3. Connect shelves 7 and 8 using bolts (L) and locknuts (M) as shown. 7 6 A×4 B×4 C×2 L×4 M×4 Needed Parts Step 4 cambolts 2. Connect right side panel 2 to unit using combolts (A), comlocks (B),bolts (L) and lock nuts (M).
PAGE 6
Needed Parts Step 5 1. Screw com bolts (A) into top panel 3 . 3 side panels 1 & 2 using com locks (B). A×6 B×6 Needed Parts Step 6 5 10 11 using screws (D).
PAGE 7
Needed Parts Step 7 1. Screw combolts (A) and insert skinny wood dowels into drawer front 14 . 2. Connect drawer front 14 to assembly by using comlocks (B). 3 14 A×3 B×3 J×4 K×2 N×2 Needed Parts Step 8 1. Carefully insert drawer into unit.
PAGE 8
Needed Parts Step 9 & right panel 2 using small screw (O) 2. Place unit against wall and mark bracket holes. 3. Drill holes in wall slightly smaller than anchor (H) and gently tap anchors into holes. 4. Fasten unit to wall using screw (D) through brackets (I). 5. Enjoy.