COMPONENTS PART FIGURE | DESCRIPTION | QTY | PART FIGURE DESCRIPTION | QTY AR\ TOP SHELF 1PC | F S_\ |FIXEDLEVELSHELF| 1PC B BOTTOM SHELF | 1PC | G ADJUSTABLE SHELF | 1PC c | DARDANELLES | 1PC | H @ DOOR 1PC D SIDE PANEL-RIGHT | 1PC E REAR PANEL 1PC E @ MIDDLE SHELF | PCS Pg3of13
HARDWARE & TOOLS PART FIGURE DESCRIPTION| QTY | PART FIGURE DESCRIPTION | QTY 1 WOODEN DOWEL |20PCS| 6 B SCREW PCS #3*12 APC 7 &b ~ Massasoit | 1ST q 3 &)Y cockamamie | PCS | 8 A\ s Crew |12PCS 312 mm 4 % HAMMERLOCK | PCS 9 & SHELF PIN PCS 5 & aue | 1PC | 10 | Scrumhalf s Crew | PCS $4*38mm 11 fio ANCHOR PCS TOOL NEEDED: SUGGESTION: PHILIPS SCREWDRIVER REQUIRED NOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: ASSEMBLED AND SET UP. 1. DO NOT LET ANY SHARP OBJECTS TOUCH OR RUB THE SURFACE OF THE PRODUCT. 2.
PCs STEP 1: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue. 2. Insert the Wooden Dowel #1 and the Pin #2 into the hole on the Side Panel-Left C tighten the Pin #2. 3. Insert the Wooden Dowel #1 and the Pin #2 into the hole on the Side Panel -Right D tighten the Pin #2. 4. Connect the Fixed Level Shelf F and the Side Panel-Right D with the Wooden Dowel #1 and the Pin #2.
1pc 1pc STEP 2: 1. Insert the Cam Lock #3 into the hole on the Fixed Level Shelf F. 2. Tighten the Cam Lock #3 to the Pin #2, insert the Cam Lock Cap #4 when finish. 3.Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue . 4.
PCs PCs < o 1pc 1pc STEP 3: 1. Insert the Cam Lock #3 into the hole on the Fixed Level Shelf F. 2. Tighten the Cam Lock #3 to the Pin #2, insert the Cam Lock Cap #4 when finish. 3.Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue . 4.
PCs PCs STEP 4: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue . 2.Connect the Top Shelf A and the Side Panel-Left C & the Side Panel-Right D with the Wooden Dowel #1 and the Pin #2. 3. Insert the Cam Lock #3 into the hole on the Side Panel-Left C and the Side Panel-Right D. 4. Tighten the Cam Lock #3 to the Pin #2, then insert the Cam Lock Cap #4 when finish.
pests STEP &: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue . 2.Insert the Wooden Dowel #1 into the hole on the Fixed Level Shelf F. 3.Connect the Middle Shelf E and the Fixed Level Shelf F with the Wooden Dowel #1. 4 .Insert the Wooden Dowel #1 into the hole on the Bottom Shelf B.
6 WG $4*38 mm PCs STEP 6: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue . 2.Connect the Bottom Shelf B and the main body with the Wooden Dowel #1. 3.Insert the Screw #10 into the hole on the Bottom Shelf B,then tighten the Screw #10.
7 A #3*12 mm STEP 7: 1. Connect the Rear Panel | and the main body with the Screw #8,tighten the Screw #8. 2.
STEP 8: 1. Attach the Knob #7 to the Door H with the Bolt #7,then tighten the Bolt #7. 2. Insert the Shelf Pin #9 into the hole on the Side Panel-Left C & the Side Panel-Right D. 3.
9 10 $4*38 mm PCs 1 =L PCs STEP 9: 1. We provide Alignment Paper Strip to help you to install the Medicine Cabinet on the wall. Place Alignment Paper on the desire location and make sure it is horizontal. Pr-drill anchor holes,and install anchor #11. 2. Relayed the medicine cabinet on the wall,and aimed the hole on the Rear Panel | and the anchor #11 in the wall. 3. Tighten the screw #10 into the anchor #11,and pass through the hole on the Rear Panel |.