Product Manual MODEL-ONE M O D U L A R STA N D SYST E M www.andoveraudio.
Page 2
Table of Contents Introduction /Assembly Options............................................................4 About Andover / In The Box........................................................... 5 Assembly............................................................6 Warranty / Cleaning / Service............................................................7 Contact............................................................
Model-One Modular Stand System The Model-One Modular Stand System is the perfect platform to support the Model-One Turntable Music system. It can also be used with the Andover Spinbase, or any other equipment that fits on its 18” W x 13.5” D top surface. It may be constructed in various combinations to fit your needs. The Upper-Stand must be combined with either the Lower-Stand, or the ModelOne Subwoofer.
About Andover Audio Since 2012, Andover Audio has provided behind the scenes design and manufacturing services to some of the most respected brands in automotive, professional, and high-performance consumer audio. We now focus our awardwinning skills on our own product line that artfully blends exceptional sound with distinctive design.
Two-Shelf Assembly Follow these instructions for standard Two-Shelf assembly. Refer to your Subwoofer manual to attach the Upper-Stand to the Model-One Subwoofer. Begin by placing the Upper-Stand with its top down on a soft surface that will not scratch the top of the stand. 1. Screw the four threaded cam-lock posts (Item 1) fully into four white threaded holes in the bottom corners of the Upper-Stand. If you are attaching the Upper-Stand to a LowerStand, use the holes nearest the edge of the stand.
Two-Year Limited Warranty Andover Audio warrants your product against manufacturing defects and workmanship to the initial purchaser for a period of two (2) years from the date of delivery to customer. Andover Audio will repair or replace the unit as necessary to restore proper operation. This warranty covers both parts and labor for the warranty period. The warranty excludes physical damage caused by accident or abuse outside of our control, or if the unit is damaged due to incorrect packing.
Andover Audio, L.L.C. 15 High Street North Andover, Massachusetts 01845 www.andoveraudio.com | support@andoveraudio.com | 978.775.3670 Andover is a registered trademark of Andover Audio L.L.C.
Richelieu Hardware Ltd TIP-RESISTANT FURNITURE SAFETY BRACKETS THIS KIT INCLUDES : Designed to help prevent furniture from tipping over. Each package contains: - 1 adjustable strap that is releaseable; this enables furniture to be moved during cleaning. - 2 plastic supports and four installation screws. Mount one support to the piece and one to the wall .
FSB-100 Tip-Resistant Furniture Safety Brackets • Designed to help prevent furniture t1pover. • Detachable strap allows for easy moving of furniture for cleaning • Also helps prevent furniture t1pover during minor tremors IMPORTANT: Check to be sure the wall bracket 1s firmly screwed into wall stud, the furniture bracket is firmly attached to the frame, and :: . .
INSTALLATION: 1 Locate a wall stud behind your furniture. Position a bracket on the stud approximately 1" below the top of the furniture. Mark and drill pilot hole into the center of the stud with a 3/32" drill bit Attach a bracket to the stud with the long screws provided 2. On the back of the furniture, a bracket will need to be attached to the furniture frame at the top. To do this, temporarily move the furniture into its final pos1t1on and mark the location of the wail bracket on the furniture frame.
·chelieu Hartiwaro Ltd 2600 Greengate Drive Greensboro, North Carolina 27406 336.841.5100 www.richelieu.com Manufactured By ....
e onc:lover All Model-One series products are constructed from natural genuine hardwoods and veneers protected with a clear matte lacquer finish . This allows the natural beauty of the wood to show through unaltered. Because no two pieces of wood are ever truly alike, some color and grain variation from panel to panel, or unit to unit will naturally occur. This contributes to the beauty and uniqueness of each piece.