Owner's Manual
Using
Spinbase
To turn on Spinbase, rotate the central control knob clockwise past the click. The
LED
pointer on the knob will illuminate
to
indicate power is on.
All inputs on Spinbase are always active.
It
is not necessary
to
switch between
inputs. Simply start using the source you want
to
hear, and turn
off
the source
you don't.
You
may find this uncommon, but once you become accustomed
to
it
we believe you will find
it
to
be
natural and intuitive.
Connecting
Bluetooth
Devices
Spinbase is easy
to
connect. No passwords
or
codes are required.
Turn Spinbase power on.
Enter the Bluetooth menu on your phone
or
other device.
Select Spinbase.
• Once the device indicates it's "connected", you are ready
to
play.
Please note:
If
you wish
to
connect
to
a different device, you
must
first
"discon-
nect" or "forget" the original device. This
must
be done from the original device.
Bass
& Treble
Controls
Bass and Treble controls are located on the back panel and may boost or cut
their respective frequency ranges. The normal position with unaltered response
is indicated by the detent you feel when the controls are centered.
Specifications
Description: Integrated Powered Loudspeaker system with Phone Preamp and Bluetooth
receiver.
Music
Power: 36W
total
(2 x 18W)
Acoustic Frequency range: 65Hz - 20kHz +/- 3dB (under laboratory conditions)
Phone input impedance:
47k
/ 1 00pF
Line Input impedance:
20k
Ohm
Headphone/
Line Output:
105mW@
16 Ohms. Frequency Response:
20Hz-20kHz
Power Consumption:19VDC / 2A
Weight: 5 kg /
11
lbs
Dimensions: Height: 82.55
mm
I 3.25"
Width:
446mm
/ 18"
Depth:
356mm
/ 13.5"
9