Quick Setup Guide

Quick Setup Guide (Version 8)
©2019 Andover Audio, LLC
Two Year Warranty
Andover Audio warrants Spinbase against manufacturing defects and workmanship to the initial purchaser
for a period of one (1) year from the date of delivery to customer. Andover Audio will repair or replace the
unit as necessary to restore proper operation. This warranty covers both parts and labor for the warranty
period. The warranty excludes physical damage caused by accident or abuse outside of our control. If you
think you need warranty service, please contact us to obtain an RMA (Return Merchandise Authorization) by
emailing [e-mail] or calling 978.775.3670. Please visit our website’s support section
for more information about returns and exchanges.
Spinbase Setup
1. Remove Spinbase from its box. Keep the
packaging for returns or exchanges.
2. Place Spinbase on a level surface. This is
important for your turntable performance.
3. Before turning it on, plug Spinbase into a
power outlet using its power adapter.
Connect a Turntable or Record Player
1. Place your turntable on top of Spinbase.
2. Using a turntable with a Magnetic cartridge
(most common): Connect your turntable to
“Magnetic Phono”. Ensure switch is set to
“Line-In”.
3. Using a turntable with a Ceramic cartridge,
or a record player with a line output:
Connect it to the Line-In on Spinbase. Set
switch to “Ceramic”.
4. Use the ground connector if your turntable
supports it.
5. Leave shorting plugs in the “Magnetic
Phono” input when it’s not being used.
Connect a Bluetooth Device
1. Connect to “Spinbase” in your Bluetooth settings.
2. Disconnect Bluetooth for another device to pair.
Notice: Some users may experience an unpleasant noise when powering Spinbase on/
off while their headphones plugged in. Please be aware.
Visit our website’s support section for the latest product manuals.