User's Manual

Andrew Corporation

40 Technology Drive

Warren, NJ U.S.A. 07059

Tel: (908) 546-4600

Andrew Wireless Solutions – A Commscope Company

Proprietary – Use Pursuant to Company Instructions

Installation and Operation Set-Up

The OneBase™ Cell Extender Micro-3 Cabinet OBE-1900-M8Y1 is shipped from the

factory with all necessary internal cables and wiring. Each unit is factory tested to meet

overall product requirements. As such, installation of the Micro-3 Cabinet involves the

mounting and securing of the cabinet per detailed manual instructions. Power is supplied

to the unit via terminal blocks located in the rear of the cabinet behind the fan tray

assembly. BTS and Antenna port interfacing is provided on the rear patch panel, with

labeled 7/16 DIN connectors.

FCC Statements: FCC ID: S8L-OBEMICRO3

This device complies with Part 2, 15 and 24 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

Warning

Changes of modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipment.

RF exposure compliance is addressed at the time of licensing, as required by the

responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Industry Canada Statements: IC:2237F-OBEMICRO3

1. Quality Norms : The testing of the equipment is carried out as the norms laid in IC

standards.

2. Labeling : OneBase™ Cell Extender Micro-3 Cabinet OBE-1900-M8Y1 when

sold in Canada will have:

(a) The certification number, prefixed by the term "IC: ", i.e. IC:2237F-OBEMICRO3

(b) The manufacturer's name, trade name or brand name, i.e. Andrew Corporation

Cabinet Model Number: OBE-1900-M8Y1 (Y=1,2,3 represents the number of installed PAs)

(d) This device complies with RSS-131, RSS-102 of the IC Rules.

3. External Control

The OneBase™ MicroCabinet Cell Extender OBE-1900-M8Y1 does not have any

external controls accessible to the user for any adjustments, to operate in violation of the

limits prescribed in this Standard. Furthermore, information on internal adjustments,