Owner manual

3
Operang the scales
1. Place the scales on a hard, at surface.
2. When weighing ingredient in a bowl, place the
bowl on the scales before turning the unit on.
When using the tare funcon place the bowl on
the scales aer turning the unit on and press the
Z/T buon.
3. Press and release ON/OFF buon to turn on the
unit.
4. Wait unl the display prompts to “0” before
starng the weighing process.
Selecng weight units
To select your desired unit of weight, press the “UNIT”
buon unl the desired unit is displayed.
This funcon can also be used during the weighing
process to view the dierent metric units.
The units are available in ounces, pounds, grams and
kilograms.
Zero or Tare funcon
Condion 1 Zero funcon
To weigh dierent loads consecuvely without removing
loads from the scale, place the rst load on the scale to
take the rst reading.
Press the Z/T buon to reset the LCD to “0” then add the
next load.
This operaon can then be repeated.
Aer the third load has been added the Z/T buon must
be pressed twice to reset the LCD to “0”.
Max weight capacity is reduced by the total weight of all the loads.