Owner manual

4
Condion 2: Tare funcon
To use the “Tare” funcon turn the unit on and place
a plate or bowl on the unit and press the Z/T buon
so that the LCD indicates “0”.
Place the rst load of the to take a reading.
Press the Z/T buon and the LCD will return to “0”.
Place the second load on the scales to take a reading.
Press the Z/T and the LCD will reveal the total weight.
Press the Z/T buon a second me and the LCD will
return to “0”.
This operaon can then be repeated.
Max weight capacity is reduced by the total weight of
Auto shut o
Auto shut o occurs if the display shows “0” or the
same weight for 2 minutes.
Manual shut o
To maximise baery life, always press ON/OFF to
turn the scale o aer use.