User guide

6
inducon hob.
 Press the On/Standby key once, the LED display will show “L” and the power
indicator light will ash. The cooking funcon is now ready to be selected.
(Note: if no operaon is selected for 30 seconds aer pressing the On/
Standby key, the indicator light will automacally turn o).
 Press the funcon key once, the pre-set power stage “5” is selected and the
device will begin to heat.
 You can change the power seng with the arrow keys at any me from the
power range of 1-10.
 Press the funcon key a second me to select the temperature seng. The
pre-set temperature “120˚C” will automacally be selected.
 The temperature seng can be then changed from a range of 60-240˚C by
using the arrow keys.
 The inducon hob can be changed from the power level seng mode to the
temperature seng mode at any me during the operaon by pressing the
funcon key and selecng the desired funcon. The value last set in the
respecve operang mode will be stored upon switch over.
 Press the funcon key a third me and the me funcon will be selected.
 The display will show the number “0”. The arrow keys can then be used to
select the desired me in 5 minute intervals (up to a max of 180 minutes).
 The display will then count down the duraon in minutes. Please note that
the me, power level and temperature seng can all be changed
individually during the cooking process.
 Once the cooking or warming process is complete, disconnect the mains plug
from the power outlet.
 Do not place any empty cookware on the ceramic plate. Heang an empty
pot or pan will acvate the overheang protecon and the device will turn
o.
 Do not operate the device if it is damaged in anyway or does not funcon
properly.