Manual

3
Zero or Tare funcon
Condion 1 Zero funcon
 To weigh dierent loads consecuvely without
removing loads from the scale, place the rst load on
the scale to take a reading.
 Press the Z/T buon to reset the LCD to “0” then add
the next load.
 This operaon can then be repeated.
 Aer the third load is added the Z/T buon must be
pressed twice to reset the LCD to “0”.
 Max weight capacity is reduced by the total weight of all loads.
Condion 2 Tare funcon
 To use the Tare funcon turn the unit on and place a
plate or bowl on the unit and press the Z/T buon so
the LCD indicates “0”.
 Place the rst load on the scale to take a reading.
 Press the Z/T buon and the LCD will return to “0”.
 Place the second load on the scale to take a reading.
 Press the Z/T and the LCD will reveal the total weight.
 Press the Z/T buon a second me and the LCD will
return to “0”.
 This operaon can then be repeated.
 Max weight capacity is reduced by the total weight of all loads.
Auto Shut o
 Auto shut o occurs if the display shows “0” or shows
the same weight reading for 2 minutes. (Fig 8)