User Manual

23
Cleaning and storing the appliance
No liquids should enter the top of the halogen lid as this could cause
the electrics to short circuit resulng in a re. If liquid enters the
halogen lid it must be check over by a qualied electrician before It
can be used.
Always disconnect the appliance from the mains and turn the
appliance o before cleaning the appliance.
Improper cleaning may damage the appliance and the mains, always
turn the appliance o before any cleaning.
Clean the halogen lid with a damp cloth only. The base and
accessories can be hand washed as normal using a mild detergent and
warm water.
Self cleaning funcon
Improper cleaning can result in damage to the appliance. Allow the glass
bowl to completely cool before lling it with cold water. Placing cold water
in the bowl before it has cooled down will cause the glass to crack.
Seng the self-cleaning funcon
1. Remove any food and thick grease.
2. Fill the bowl approximately half full with cold water and a drop of
washing up liquid.
3. Place the lid down to the closed posion.
4. Set the temperature control dial to 250˚C.
5. Press the mer dial to 5-10 minutes.
6. Press the start buon.