Owner's manual

12
Assembly
1. Aach the drive sha (4) to the power unit (5)
and place the 1.5l bowl (3) onto the power unit
rotang clockwise unl it clicks into place.
2. Place the citrus press (14) on top of the 1.5L
bowl (3) so that the lip of the citrus press can t
into the bowl (3). Rotate it clockwise unl it
clicks into posion.
3. Place the citrus press aachment (15) into the
centre of the citrus press (14).
4. Place the cut fruit onto the citrus press aach-
ment (15) and press down.
5. Turn the speed seng to a minimum seng
and increase if necessary.
Disassembly
1. Remove the citrus press aachment (15).
2. Rotate the citrus press (14) an-clockwise to unlock it from the bowl.
3. Rotate the 1.5L bowl (3) an-clockwise and remove.
4. Remove the drive sha (4) and clean accordingly.
Citrus press
Assemble the appliance according to the diagram
Use the citrus press to squeeze the juice from citrus fruits (e.g. oranges, lemons,
limes and grapefruits).
To ensure the long life of your machine, do not use it connuously for more than 3
minutes on this funcon. Only use for a maximum of 3 mes before leng the ma-
chine cool down fully. The motor should be allowed to cool down for at least 30
minutes before the next operaon.