User guide
3
6. We advise you to use wall plugs if aaching the knife Rack to surfaces such
as stone, concrete, brick, plasterboard and any other hard surfaces excluding
wood and metal.
7. If you are unsure seek professional advice from a qualied person.
8. Hold up the knife rack where you would like to install it and use a spirit level
if required to ensure that the knife rack is straight.
9. Use a pencil to mark the screw holes.
10. While holding up the knife rack, insert one screw into the wall through one
of the pre drilled holes on the knife rack using the screw driver, then use the
spirit level to ensure the knife rack is straight before inserng the second
screw to aach the knife rack completely onto the wall.
11. Ensure the knife rack is securely aached to the wall.
12. Once the knife rack is successfully aached to the wall, test the holder by
placing your knifes on to it. The knife rack should hold the weight of the
knives without the knife rack moving at all.
Cauon
Ensure when drilling or pung screws into walls that there are no pipes or
wires.
Ensure that the knife rack is aached to wall and is kept away from children .