Owner's manual

5
Before rst me use
1. Remove all packaging and plasc bags from the appliance.
2. Clean all parts of the appliance before use as instructed in the secon “Cleaning
and Maintenance”.
3. Posion the appliance on a at dry and stable work surface.
Note: Please wear oven gloves when opening and closing the door of the appliance.
Using the product
1. Ensure that all parts of the appliance are connected properly. This includes the
centre piece being correctly aached to the brackets and the electrical cord
being correctly inserted into the centre piece. Place the tray in the boom of
the appliance to collect the popcorn.
2. Also be aware to remove any foreign objects from the appliance.
3. Turn the appliance on by plugging the appliance in and ipping the “On/O”
switch to the “On” posion.
4. Allow the appliances centre piece to heat up (approx. 3-5 minutes).
5. Turn the appliance o.
6. Using the small measuring spoon add 1 spoonful of vegetable oil into the centre
piece by liing the ap up by the plasc handle.
7. Add one large measuring scoop full of popcorn kernels into the centre piece.
8. Turn the appliance back on and close the door.
9. Keep the door closed during operaon.
10. The popcorn will then begin to pop. Once the popping has stopped, p the
centre piece so that the popcorn is collected in the tray.
Note: If you wish to make more than one cycle of popcorn, add a further spoonful of
oil to the main body of the appliance for every cycle. Follow the instrucons 6-8.
11. Turn the appliance o and unplug it from the mains supply.