Manual

8
Programmes
START/STOP BUTTON
 This secon will give instrucons on how to pause, start and stop the selected
program.
 To start a program, press the stop/start buon once. A short beep and the two
dots will ash, signalling the program is beginning to start.
 All other buons are inacve during a program cycle, apart from the stop/start
buon.
To stop the program press and hold the stop start buon for approximately three
seconds, a long beep will then signal the program has iniated the close down
procedure.
PAUSE
Aer a procedure starts up, you can press the PAUSE buon to pause it at any me. The
operaon will be paused but the seng will be memorized and the outstanding me will
ash on the LCD screen. Press the PAUSE buon again and the program will connue. If
le for 10 minutes without pressing any buon the program will connue.
LIGHT
To view your loaf during the baking process simply press the LIGHT buon once and the
inside of the appliance will become illuminated. The light will stay on for 1 minute and
then go o automacally. If you wish to turn the light o before the minute has elapsed
press the LIGHT buon and it will turn o .